Work

Preparation of CNT/PEEK porous composites via NaCl leaching and FDM for bearing cage applications

Year: 2025

Type: article

Abstract: Porous composites can store and release lubricants via their unique pore structures, enabling continuous lubrication for self-lubricating bearing cages. In this study, carbon nanotube (CNT)/polyether ether ketone (PEEK) porous self-lubricating bearing cage materials were fabricated using the fused deposition molding (FDM) technique. Their preparation process, microstructure, and properties were systematically investigated. The results demonstrate the initial feasibility of preparing CNT-reinforced PEEK porous composites via FDM with optimized parameters. The incorporation of CNTs effectively modulated the material's structure, increasing the average pore size from 0.08 μm to 11.62 μm and optimizing the porosity within a specific content range. However, higher CNT content resulted in poor extrusion flowability and nozzle clogging. Nevertheless, CNTs significantly enhanced the material's tribological performance while maintaining good mechanical properties. This study provides a theoretical basis and process reference for preparing self-lubricating bearing cages, while also identifying that process optimization and CNT dispersion require further in-depth investigation.

Source: Scientific Reports

DOI: 10.1038/s41598-025-27346-6

Authors: Baorun Yang, Zhuangya Zhang, Xiaoqiang Wang, Ruijie Gu, Ming de Duan

Institution: Henan University of Science and Technology

Language: English

Topic: Tribology and Wear Analysis

Subfield: Mechanics of Materials

Field: Engineering

Domain: Physical Sciences

SDG: Industry, innovation and infrastructure

Open Access status: gold

Estimated APC paid: $2,690