Work

Deep-Ultraviolet Beam Homogenizers: Phase-Modulated Metalens vs. Space-Modulated Chromium Thin-Film

Year: 2025

Type: article

Abstract: Deep-ultraviolet (DUV, 193 nm) tools for lithography and precision micromachining are often limited by beam-profile nonuniformity, which degrades critical-dimension control, line-edge roughness, and process windows. Conventional phase-dependent homogenizers can lose performance under realistic phase noise and pointing jitter. We investigate two complementary, energy–space-modulation routes to robust homogenization: (i) a metalens-based microlens array (MLA) that forms a flat-top via controlled beamlet overlap and (ii) a chromium-on-sapphire attenuator that equalizes intensity purely by amplitude shaping. Coupled FDTD and optical modeling guide a graded-transmittance Cr design (target transmittance 0.8–0.9) that converts a Gaussian input into a flat-top plateau. Experiments at 193 nm verify that both approaches achieve high static uniformity (Urms <3.5%). Under dynamic conditions, the MLA exhibits sensitivity to transverse-mode hops and phase fluctuations due to its reliance on coherent overlap, leading to reduced uniformity and fill factor. In contrast, the Cr attenuator remains phase-insensitive and maintains stable output under jitter, offering a power-robust, low-maintenance alternative for industrial DUV systems. We discuss design trade-offs and outline hybrid MLA + attenuation schemes that preserve MLA-level flatness while approaching the robustness of amplitude-shaping solutions.

Source: Photonics

DOI: 10.3390/photonics12121192