Work

Effect of the Ferrite–Austenite Phase Ratio on the Silver Coating Properties of Super Duplex Stainless Steel EN 1.4501 for Li-Ion Battery Cases

Year: 2025

Type: article

Abstract: With the growing demand for durable and corrosion-resistant materials in advanced Li-ion battery cases, super duplex stainless steels (SDSSs) have emerged as promising candidates due to their excellent mechanical and electrochemical properties. This study aims to investigate how the ferrite and austenite phase balance in SDSS EN 1.4501 affects the microstructural and electrochemical behavior of Ag coatings, tailored for next-generation battery enclosure applications. Ag coatings were deposited to PVD (to 1 μm) on SDSS EN 1.4501 substrates with varying ferrite (from 32 vol.% to 70 vol.%) and austenite ratios (from 56 vol.% to 30 vol.%) to evaluate the influence of phase balance on coating performance. Microstructural analysis was performed using field emission scanning electron microscopy (FE-SEM, mag x 1000), electron backscatter diffraction (EBSD), and X-ray diffraction (XRD, from 20° to 80°), which provided insights into surface morphology, crystallographic texture, and phase distribution. Electrochemical characteristics were assessed through open circuit potential (OCP), and potentiodynamic polarization in a simulated corrosive environment. The results showed that a balanced duplex microstructure promoted superior Ag coating adhesion, grain refinement, and uniform phase distribution. Furthermore, the electrochemical analyses indicated enhanced corrosion resistance and passivation layer stability in volume fraction balanced substrates, as evidenced by more noble OCP values (form −0.06 V to −0.11 V), and potentiodynamic polarization value (higher corrosion potential (from 0.08 V to 0.10 V), and lower corrosion current densities (from 3 × 10−7 A/cm2 to 4 × 10−7 A/cm2)). These findings demonstrate that optimizing the phase balance in SDSS is critical for achieving high-performance Ag coated surfaces, offering significant potential for durable and corrosion-resistant Li ion battery casing applications.

Source: Coatings

DOI: 10.3390/coatings15121423