Work

Difference in Tableting of Lubricated Spray-Dried Mannitol and Fluid-Bed Granulated Isomalt

Year: 2025

Type: article

Abstract: Background: Polyols are widely used as tablet diluents due to their high solubility, favourable taste, and ability to form robust tablets. Thus, commercially available polyols, such as mannitol and isomalt, can be considered for the preparation of low-drug-dose formulations with a high polyol load. Methods/Results: This study investigated spray-dried mannitol (Mannogem® XL Opal SD and Pearlitol® 200 SD) and fluid-bed granulated isomalt (galenIQ™ 720 and galenIQ™ 721) at magnesium stearate levels of 0.5 and 3.0 wt.% and consolidation pressures of 100 and 300 MPa. During the tableting of 100 consecutive tablets, materials displayed different ejection force profiles: galenIQ™ 720 and galenIQ™ 721 demonstrated low and stable ejection pressures; Mannogem® displayed a lubricant- and compaction pressure-dependent profile, whereas Pearlitol® produced the highest ejection forces, particularly at 0.5 wt.% magnesium stearate. To elucidate these differences, the used materials were characterised in terms of SEM imaging, moisture content, surface area and porosity analysis, particle size distribution, pXRD, and densification kinetics. Using a compaction simulator, key parameters including pressure–displacement profiles, mean yield pressure, and strain rate sensitivity of the unlubricated materials were experimentally determined, while pressure transmission, residual die-wall pressure, and friction coefficient were computed. Conclusions: The study concluded that variations in tableting properties were primarily governed by moisture content and, for mannitol grades, by manufacturing method-dependent differences in particle microstructure. These insights provide guidance for the rational selection of polyol excipients and appropriate lubrication levels in direct compression tablet formulations.

Source: Pharmaceutics

DOI: 10.3390/pharmaceutics17121566