Work

Optimized Green Cut-and-Fill Mining Method for Subsidence Control and Material Self-Sufficiency

Year: 2025

Type: article

Abstract: In the face of the urgent need for sustainable practices in the coal industry, we propose a novel green cut-and-fill mining method aimed at achieving material self-sufficiency and mitigating overburden subsidence. This method leverages the goaf roof as an in situ filling material, integrating long-wall caving mining efficiency with partial filling techniques. Through laboratory analog material modeling, numerical simulations, and structural mechanics modeling, we compare the performance of cut-and-fill mining and traditional caving mining methods. The results show that the cut-and-fill method offers more uniform and controlled deformation behavior. Specifically, vertical and horizontal displacements along 40 m survey lines are significantly reduced, with a maximum reduction on the order of millimeters, compared to caving mining. Furthermore, the floor stress concentration coefficient is lower, and the total number of fractures decreases, with shear fractures reduced by 8.8% and tensile fractures reduced by 66.9%. The gangue column in the cut-and-fill method effectively supports the goaf roof, preventing fracture formation and extending the deformation time. The results demonstrate the effectiveness of the cut-and-fill method for subsidence control, suggesting its potential for achieving green and sustainable coal mining practices.

Source: Applied Sciences

DOI: 10.3390/app152412923