Year: 2025
Type: article
Abstract: Addressing the limitations of existing power amplifiers, particularly in terms of accuracy and noise performance, a high-voltage and high-current power amplifier has been developed. The input stage utilizes a rail-to-rail circuit structure, allowing the amplifier to deal with the full swing of input signals from the negative to the positive power supply. The output stage features an innovative class AB configuration with a bias structure, effectively reducing the crossover distortion typically associated with traditional circuits. This design improves linearity, achieving an output range that extends to the rails, while also enhancing the power supply rejection ratio and optimizing noise performance. Furthermore, over-temperature protection and current limiting circuits have been integrated to safeguard the system against permanent damage under extreme conditions. The power amplifier circuit was simulated and validated using Cadence 61 Spectre software. With a power supply of ±30 V, the amplifier achieved an output current of 560 mA, a low-frequency gain of 138 dB, a bandwidth of 24 MHz, and a noise level of 4.8 nV/Hz. The slew rate was measured at 14.2 V/μs. Compared to existing literature, significant advancements have been achieved in terms of gain, bandwidth, and noise performance.
Source: Electronics
Institution: Shenyang University of Technology
Language: English
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
Award: G251323965
OpenAlex ID: W4417435927