Work

High-speed coherent optical orthogonal frequency-division multiplexing design and implementation

Year: 2010
Type: dissertation
Abstract: We have witnessed a dramatic increase of interest in orthogonal frequency-division multiplexing (OFDM) from optical communication community in recent years.The number of publications on optical OFDM has grown dramatically since it was proposed as an attractive modulation format for long-haul transmission either in coherent detection or directdetection.Over the last few years, net transmission data rates grew at a factor of 10 per year at the experimental level.These progresses may eventually lead to realization of commercial transmission products based on optical OFDM in the future, with the potential benefits of high spectral efficiency and flexible network design.As the IP traffic continues to grow at a rapid pace, 100 Gb/s Ethernet is being considered as the new generation transport standard for IP networks.As the data rate approaches 100 Gb/s and beyond, the electrical bandwidth required for CO-OFDM would be at least 15 GHz and may not be cost-effective to implement even with the best commercial digital-to-analog converters (DAC) and analog-to-digital converters (ADC) in silicon integrated circuit (IC).To overcome this electrical bandwidth bottleneck, we propose and demonstrate the concept of OBM-OFDM to divide the entire OFDM spectrum into multiple orthogonal bands.Due to the inter-band orthogonality, the multiple OFDM bands with zero or small guard bands can be multiplexed and de-multiplexed without inter-band interference.With this scheme, transmission of 107 Gb/s CO-OFDM signal over 1000 km (10×100 km) standard single mode fiber (SSMF) has been realized using only erbium-doped fiber amplifier (EDFA) and without a need for optical dispersion compensation.Large amount of optical OFDM studies are reported based on offline processing using high-speed sampling scope which show many advantages of optical OFDM systems achieving over 100 Gb/s aggregated data rate and over thousands of km in transmission distance.However, many lack discussion on the potential implementation difficulties.Special requirements of optical communication systems such as several order of magnitude higher data rate than wireless counterpart requires careful studies in feasible real-time implementation.We demonstrate a field-programmable gate array (FPGA) based real-time CO-OFDM receiver at a sampling speed of 2.5 GS/s, and show its performance in receiving a subband of a 53.3 Gb/s multi-band signal.Additionally, by taking advantage of the multiband structure of the OFDM signal, we successfully characterize a 53.3 Gb/s CO-OFDM signal in real-time by measuring one of its subbands at a time (3.55 Gb/s).Transmission bandwdith of ever-advacing optical transport is one of the important costdrivers.To save the transmission bandwidth, using advanced coding to improve system performance without the bandwidth extension is a promising technique.We show two approaches with different coding scheme for CO-OFDM -trellis coded modulation (TCM) and low-density-parity-check (LDPC).Both schemes are demonstrated using CO-OFDM with higher order moulation format for long haul transmission.The superior system performance of these two schemes shows that the combination of advanced coding with high-level modulation may be a promising technique to support high-spectral-efficiency and highperformance CO-OFDM transmission.This is to certify that (i) the thesis comprises only my original work, (ii) due acknowledgement has been made in the text to all other material used, (iii) the thesis is less than 100,000 words in length, exclusive of table, maps, bibliographies, appendices and footnotes.
Author: Qi Yang
Language: English
Open Access status: green
OpenAlex ID: W49500093
Cites: 123
Cited by: 4
Related to: 10