Open Circuit Voltage Improvement Using Amorphous Silicon p-Layer in Flexible n-i-p Solar Cells
Year: 2010
Type: article
Abstract: Solar cells based on amorphous silicon are an attractive route to produce flexible solar cells. The n-i-p configuration allows the use of low cost flexible substrates such as poly-ethylene-naphtalate (PEN). In this work we aim at obtaining a high open circuit voltage (Voc) without changing intrinsic layer dilution and temperature. It involves a well adapted p-layer which is required to fulfill the following conditions: to create a high built-in Voltage (Vbi) through the junction, to be transparent and thin enough in order to minimize light absorption, to yield a low level of recombination at the interface between the intrinsic (i) and the p-doped (p) layer, and finally to allow a proper contact to the transparent conductive oxide (TCO). We found that p-layers deposited in the protocrystalline growth regime lead to an increase up to 45 mV. Our solar cell deposition process can be directly applied to PEN substrate.
Source: EU PVSEC
Authors: Remi, R., Eminian, C., Haug, F.-J., Ballif, C.
Institution: École Polytechnique Fédérale de Lausanne
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W581834725
