Novel Impedance Sensing via Semiconductor Strain Gauge and Magnetic Resonant Coupling for Wireless Force Measurement
Year: 2025
Type: article
Abstract: Wireless force measurement (WFM) can be used for those scenarios where cable connection and power supply are not available, such as wheel rail force measurement. To enhance the sensitivity and extend the lift-off (the distance between the Tx and Rx) for WFM, this paper introduces a novel approach based on impedance sensing through magnetic resonant coupling (MRC), coupled with a semiconductor strain gauge (SSG), and measured by a developed inductance to digital converter (LDC)-based system. Initially, a simulation was performed to investigate the influence of SSG at various coupling coefficients using parallel-parallel (PP) and series-parallel (SP) MRC topologies. Subsequently, the experiment conducted loading tests on a carbon steel specimen. A traditional strain gauge (SG) was also compared with the SSG in the same experimental set-up. Additionally, the response and sensitivity of the two topologies were analysed at various lift-offs and SSGs. The results demonstrate that the approach based on impedance sensing, MRC, and a miniaturized LDC-based system achieved WFM with high sensitivity and high lift-offs. Both equivalent parallel resistance (RPeq) and resonant frequency (fres) exhibited an excellent linear relationship with the force. The sensitivity in RPeq was found to be relatively stable near the critical coupling region, while fres exhibited only an exponential curve. SSGs affected the optimal lift-off for both PP and SP topologies. The proposed approach is highly suitable for WFM, offering low cost, portability, and fast response advantages.
DOI: 10.57711/55px-0f72
Author: Yang C, Tian G, Robinson M, Ma Q, Daura LU, Ibrahim ET
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W6898448718
FWCI:
Cites:
Cited by:
Related to: