Influence of slip conditions on the extrusion process of meshing co-direction twin screw
Year: 2024
Type: article
Abstract: ObjectiveTo investigate the influence of material slip on the inner wall of the barrel and the surface of the screw on the extrusion process of the co-rotating twin screw.MethodsThe 3D model is designed by the relative motion method, and different slip boundary conditions are set and simulated by the finite element method. The relevant physical field data are obtained by simulation analysis, and the volume flow rate is calculated. The physical field of the extrusion process is studied.ResultsCompared with the non-slip condition, the pressure in the flow channel decreases, the shear rate decreases, and the viscosity increases under the screw slip condition. Under the condition of wall slip, the pressure decreases, the shear rate decreases, and the viscosity increases at the gap between the screw and the barrel. On the contrary, the pressure increases, the shear rate increases, and the viscosity decreases at the screw engagement. The analysis of the volume flow rate in the extrusion process showed that the yield increased by 28% under the screw slip condition, and the yield decreased by 62.5% under the wall slip condition.ConclusionThe occurrence of the wall slip phenomenon helps to improve the shear ability of the screw at the screw engagement, and the occurrence of the screw slip phenomenon is beneficial to improve the extrusion yield of the co-directed twin screw.
Authors: XU Zhen, LIU Zihao, HUANG Zhigang
Language: English
Subfield: Fluid Flow and Transfer Processes
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W6903951864
FWCI:
Cites:
Cited by:
Related to: