Core-shell Structured Filaments for Fused Filament Fabrication Three-dimensional Printing & Roll-to-roll Manufacturing of Piezoresistive Elastomeric Films
Year: 2018
Type: article
Abstract: Fused Filament Fabrication (FFF) is an extrusion-based 3D-printing techniques in which molten polymer filament is extruded to produce 3D objects.Fused Filament Fabrication (FFF) has become one of the most popular 3D printing techniques due to its low cost, high safety, and accessibility for consumer market.However, the intrinsic poor adhesion at filament bonding interfaces leads to poor mechanical properties of FFF manufactured parts, and the highly non-isothermal FFF process leads to warping deformation and voids in the incompletely filled products.The first part of this dissertation presents an experimental approach to measure the flow and temperature history of the non-isothermal melt extrusion process in FFF.The flow profile is measured by incorporating a pigmented polycarbonate (PC) fibres into the PC filament, and the and the temperature history is measured by an ultrafine thermocouple that flows through the extruder.Comparison with a flow model developed for isothermal flow demonstrate the critical role of radial temperature gradient in controling the velocity profile during the melt extrusion.v The second part presents a novel strategy of using a core-shell structured filament in FFF 3D printing to overcome the bond weakness at filament bonding interfaces in FFF manufactured parts.First, we demonstrate that polycarbonate-based filaments with high Tg core and low Tg shell yield improved bond strength at layer-interface and a synergistic improvement of impact properties.Further, we demonstrate that utilizing an ionomer shell -PC shell combination leads to an even stronger shell-shell bonding interface between adjacent filaments while each printed filament is filled with a continuous PC core which acts as fiber reinforcements.As a result, samples printed from coreshell filaments show significantly enhanced mechanical strength, which manifests non-break sample and improved impact resistance in notched Izodimpact tests.In addition, the printed core-shell sample less warpage caused by internal stress and better ability to print overhang features as compared to monofilaments.The third part of this dissertation presents a scalable roll-to-roll (R2R) process to fabricate elastomeric films with tunable piezo-resistivity through the use of magnetic field to align commercially available nickel (core)@silver (shell) particles (Ni@Ag) in a polydimethylsiloxane (PDMS) matrix.We find that the Ni@Ag particles in aligned chains are in loose contact with adjacent particles.vi As a result, the PDMS/Ni@Ag films exhibit piezo-resistivity behavior along thickness direction because a pressure applied to this structure can increase the connectivity of the particles and thus electrical conductivity.
Author: Peng, Fang
Language: English
Subfield: Industrial and Manufacturing Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W6980749655
