Effect of sintering conditions on physical properties of carbonated hydroxyapatite ceramics
Year: 2008
Type: article
Abstract: The carbonated hydroxyapatite powder was obtained by reaction of calcium carbonate with ortho-phosphoric acid. The compacted powder samples were sintered in the 800- 1000°C range in dry carbon dioxide atmosphere under atmospheric pressure. It is revealed that ceramics synthesized in such conditions is the AB type carbonated hydroxyapatite. The carbonization kind varies from mainly B type (at relatively low sintering temperatures) to mainly A type (at high ones). The carbonic gas atmosphere did not allow to suppress disintegration of a carbonated apatite at a sintering temperatures above 1100°C, a partial decomposition of the B type apatite occurs with calcium oxide release. As a result, porosity of the ceramics increases and its mechanical properties drop sharply. However, at temperatures below 1100°C, the carbon dioxide favors the activated shrinkage of compacts due to accelerated diffusion migration of the powder particles. In particular, the maximum density of ceramics (~94% from the theoretical value) is reached at 1000°C.
Authors: Tkachenko, M.V., Zyman, Z.Z.
Language: English
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W6981359407
