Work

Effect of prehydrolysis on delignification efficiency of hemp hurds

Year: 2022
Type: dissertation
Abstract: The aim of this thesis was to study hemp hurd biomass as a possible cheap source of cellulose-rich pulp and determine the effect that a diluted acid hydrolysis pretreatment has on the delignification of hemp biomass. Earlier studies have concluded that hemp is harder to delignify while maintaining good yields when compared to hardwoods. In this work, hemp biomass was pretreated with dilute acid hydrolysis at different temperatures. After pretreatment hemp was delignified via kraft pulping. Results were compared to non-pretreated hemp biomass delignified the same way. \n \nDilute acid hydrolysis before kraft pulping shows some positive results when compared to samples with no pretreatment. This positive effect is only present in samples pulped in low H-factors where residual alkali amount is relatively high and lignin condensation is most unlikely to occur. As fibrillation did not occur in any of the samples and the lowest pulping yield was around 55% for 22 % alkalinity soda pulping, none of the hurd delignifications can be considered successful. The best results from prehydrolysis kraft pulping results were achieved via prehydrolysis in 160 °C with 2 % acid charge of dry pulp weight. \n \nDuring this work it was noticed that the delignification efficiency of hemp hurds does not correlate with the kappa number determined for the pulp as the HexA production during kraft pulping is high. Hemp hurds seem to respond better to soda pulping than kraft pulping producing less HexA while pulping.
Author: Inkeroinen, Camilla
Language: English
Open Access status: green
OpenAlex ID: W6981398382
Cites: 52
Cited by: 2
Related to: 10