Work

Kinetics of the reductive dissolution of iron-containing by-products from drinking water treatment

Year: 2021
Type: dissertation
Abstract: Phosphorus (P) losses from agriculture and industrial/urban waste to natural environments are everincreasing, causing environmental damage and long-term P scarcity, which decrease biodiversity and food security respectively (Chen & Graedel, 2016, Cordell and White, 2013, Desmidt et al., 2015, Yuan et al., 2018).In natural systems, P mobility is largely governed by iron redox cycles (Li et al., 2012), hence, numerous iron products have been successfully applied to immobilise P in natural and engineered systems through sorption, and redox reactions (Bakker et al., 2015;Brennan et al., 2019;Cao et al., 2019;Cheng et al., 2015;Elliott et al., 2002;Koopmans et al., 2020;Li et al., 2012;Makris et al., 2005).Iron-containing by-products from drinking water treatment plants provide a low-cost, nontoxic, and bountiful source of such iron-oxides (Makris et al., 2005;Wang et al., 2013).Despite their proven efficacy, it remains largely unclear how heterogeneous mixtures of iron-oxides with varying properties behave throughout abiotic reductive dissolution processes.Obtaining a better understanding thereof is important, as the residency time in the target system is limiting to the reductive dissolution efficiency, and thus the P immobilisation efficacy, of the product.This study set out to investigate the abiotic reductive dissolution capacity of 12 iron-containing byproducts from drinking water treatment plants according to the methods from Postma (1993) and Larsen and Postma (2001) by applying a single kinetic model with a common set of parameters, kapp (initial reaction rate) and γapp (iron-oxide assemblage reactivity), to the Fe(II) concentration evolution.Auxiliary analyses with XRD were used to determine the types of minerals present in each sample.Reductive dissolution kinetics could successfully be described by the rate law J/m0=kapp(m/m0)^γapp, and significant differences could be observed between materials.The results indicate the iron-containing by-products to consist of one of three iron-oxide assemblages and were in order of most to least reactive: Ca-dominated 2-line ferrihydrite > 2-line ferrihydrite > 6-line ferrihydrite and goethite.The data suggests goethite exerts control over the terminal dissolution rate, whilst the initial dissolution rate is controlled by the least crystalline phase.Observed rate constants for 2-line Fh and 6-line Fh, transformed with the Arrhenius equation, were determined to be k2-Fh = 4.41 ─ 7.16•10 -4 s -1 , and k6-Fh = 4.56 ─ 7.44•10 -5 s -1 , similar to those determined by Larsen and Postma (2001).Despite our results only producing provisional trends, the knowledge that varying iron-containing by-products can be successfully described with a single kinetic model is valuable, and the potential for various applications is promising.* transformed using Ea = 56 kJ/mol for 2-line Fh from Yee et al. (2006) †transformed using a nearing value Ea = 60 kJ/mol for 6-line Fh from Erbs et al. (2008)
Author: Langeveld, L.J. van
Language: English
Open Access status: green
OpenAlex ID: W6982822555
Cites: 77
Cited by:
Related to: 9