Year: 2024
Type: dissertation
Abstract: This thesis marks the completion of my studies from 2016 to 2023 while I have been a researcher at Toyota Central R&D Labs., Inc.This thesis summarizes the research on the structural analysis of polymer electrolyte fuel cells focusing on the mass transport properties.The quantum beam experiments conducted in this study were measured at Japan Proton Accelerator Research Complex (J-PARC) Center, National Institute of Standards and Technology (NIST) Center for Neutron Research, and SPring-8.Iwould like to thank the many people involved.This thesis consists of nine chapters.Chapter 1 describes the general introduction to the current status and issues related to the polymer electrolyte fuel cells toward fuel cell electric vehicles, the principles of quantum beam analysis used in this thesis, and the purpose of this research.The challenges in recent years to achieve high fuel cell performance can be divided into two categories: Reduction of the oxygen transport barrier due to the dense ionomer adsorption layer on the platinum surface in the catalyst layer, and structural design of the gas diffusion layer for both oxygen and water transport.Therefore, this thesis is divided into two parts as follows:Part 1 (Chapters 2-5) describes the ionomer adsorption behavior in catalyst inks and the ionomer interface in ionomer thin films using contrast-variation small-angle neutron scattering (Chapters 2-4) and neutron reflectometry (Chapter 5), respectively.The results show that various factors such as Pt loading (Chapter 2), ionomer content (Chapter 3), temperature (Chapter 4), and carbon surface (Chapter 5) alter the interfacial structure between carbon supported-platinum and ionomers.These findings provide insight into the material design of catalyst layers for polymer electrolyte fuel cells.Part 2 (Chapters 6-8) presents the pore characterization of the gas diffusion layer by synchrotron radiation X-ray computed tomography with its oxygen transport properties.In Chapter 6, the multiscale pore morphologies of a compressed gas diffusion layers were studied to correlate the oxygen transport properties evaluated by an electrochemical approach.In Chapter 7, the effect of water distribution on the oxygen transport properties in a wet gas diffusion layer was elucidated to clarify the correlation between oxygen and water transport properties.In Chapter 8, inspired by the results of Chapters 6 and 7, I designed a multilayer pore structure of gas diffusion layers with a pore gradient distribution and proposed a new fabrication process for microporous layers to achieve a rational pore morphology within the gas diffusion layer for the mass transport properties.Finally, Chapter 9 is devoted to a summary and outlook.
Authors: 吉宗, 航, ヨシムネ , ワタル, YOSHIMUNE, Wataru
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Keywords: proton exchange membrane fuel cells, mass transfer, oxygen transport, water transport, ionomer adsorption, platinum catalyst layer, ionomer thin films, carbon-supported platinum, gas diffusion layer, pore structure, microporous layer, fuel cell vehicles, contrast variation small-angle neutron scattering, neutron reflectometry, synchrotron X-ray tomography
Open Access status: green
OpenAlex ID: W6986798709
