NITROGEN, SULPHUR AND PLATINUM FUNCTIONAL MESOPOROUS CARBONS: SYNTHESIS, CHARACTERIZATION AND PERFORMANCE TOWARD OXYGEN REDUCTION REACTION \n
Year: 2017
Type: article
Abstract: Proton Exchange Membrane (PEM) Fuel Cells are a promising technology for the clean energy production, especially in the automotive field. Actually, the main commercial catalysts employed in this system are based on Pt Nanoparticles supported on high surface area Carbon. The main issues associated to PEM Fuel Cells deal with the sluggish kinetic of oxygen reduction (ORR) at Platinum based electrode, with the low stability of both the carbon support and the metal phase, that tend respectively to oxidize and dissolve or diffuse and with the high cost due to rare and expensive Pt. In fact, nowadays high costs and low durability are the two factors that make PEM fuel cells still not competitive with internal combustion engine. For these reasons, research now focuses on obtaining more stable material with higher performances toward ORR. Two strategies are possible to improve catalyst for oxygen reduction. The first one deals with the enhancing of Pt activity modifying its electronic properties by alloying Pt with other transition metal (ligand effect) or by reducing the Pt-Pt distance (geometric effect). In both cases a Pt d-band shift occurs, which is responsible for the modification of adsorption and desorption energies of all species involved in ORR, and has as a direct consequence a modulation in the electrochemical activity. The second strategy deals with with the utilization of supports more stable respect to corrosion, like graphene, carbon nanotubes or mesoporous carbons. Furthermore, doping of carbon support with heteroatoms like N or S, can help to stabilize the metallic nanoparticles. In fact, doping creates homogeneous and narrow dispersion of small metallic nanoparticles, strongly bound to the surface of carbon support and with a higher resistance to agglomeration. Furthermore, doping has as well an influence on the electronic structure of the Pt catalyst, resulting in a modulation of its electrochemical activity. Doping is not beneficial only in noble-metal catalyst, but may also modify properties of the carbon support in which heteroatoms are present. Wettability, electrical conductivity and electrochemical activity are generally boosted when heteroatoms are inserted in carbonaceous substrates such as carbon blacks (CBs). \nThe goal of this Ph.D. project consists in synthesizing nitrogen and sulphur doped and co-doped Mesoporous Carbons. MCs are highly porous materials, which offer high surface area (>1000 m2/g), pore diameter in the range between 2 and 50 nm, controlled pore structure, good mechanical and thermal stability and good mass transport. The syntheses of differently doped MCs is conducted via hard template, a technique which allow to obtain materials with a well-defined structure, originating directly from the used template. The effect of template, pyrolysis temperature and carbon precursor on the final properties of synthesized MCs is evaluated. SEM, TEM, elemental analysis, XPS, BET and TGA are employed to characterize morphology, chemical composition and functional groups, surface are, pore dimension and thermal stability of MCs, respectively. Electrochemical performance toward oxygen reduction are evaluated via cyclic voltammetry in steady state conditions, with rotating disk electrode and with rotating ring disk electrode. Electrochemical stability tests are conducted to highlight stability of differently doped MCs and the modification occurring to functional groups. \nThe synthesized MCs are modified with Pt nanoparticles. An exhaustive deposition investigation is conducted via both chemical reduction and solid state reduction of several Pt salts, in order to find the conditions which allow to have the best Pt distribution on the whole surface of the carbon support. The catalysts made of Pt NPs on doped MCs are characterized by TEM, ICP and TGA techniques. Cyclic Voltammetry in steady conditions and with Rotating Disk Electrode are employed for the determination of electrochemical surface area (ECSA) and catalytic activity toward ORR, respectively, and compared to a commercial Pt/C catalyst. Electrochemical stability tests are conducted in order to assess both Pt degradation and C corrosion. In particular, the comparison of ECSA evolution between doped and reference catalyst determines if there is an enhancement of bounding which can mitigate Ostwald ripening. Finally, Pt on nitrogen and sulphur doped MC are incorporated in a membrane electrode assembly, in order to evaluate their performance and stability during operation as cathode material in a PEM Fuel Cell. Beyond catalytic properties, oxygen transport resistance was evaluated, knowing that all these properties are strongly influenced by the more severe condition of PEMFC environment.
Author: Perazzolo, Valentina
Language: English
Field: Energy
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W6993017524
