Microwave synthesized ruthenium antimony oxide-graphene nanocomposite materials for asymmetric supercapacitors
Year: 2022
Type: dissertation
Abstract: With the rapid rise in energy demand and ever-escalating environmental hazards, the need for transition from fossil fuel to renewable energy sources is of paramount importance, requiring better and efficient energy storage devices such as supercapacitors.Supercapacitors are energy storage devices with high power density and long cycle life, but relatively low energy density when compared to batteries.New and advanced electrode materials are required to improve the energy density requirements of next-generation supercapacitors.However, the search for new types of active materials to be used as supercapacitors' electrodes continues to be a tough challenge.Herein, ruthenium antimony oxide (RuSbO) and ruthenium antimony oxide graphene (RuSbO-G) were synthesized via the microwave-assisted method for the first time and tested as a possible electrode material for an asymmetric supercapacitor.Graphene oxide prepared by modified Hummer's method was exfoliated at low temperature and used for the synthesis of RuSbO-G.The successful formation of RuSbO and graphene-incorporated RuSbO were confirmed from X-ray diffraction patterns, which revealed that RuSbO has an orthorhombic crystalline structure with an average crystallite size of 37.30 nm, whereas RuSbO-G crystallite size was calculated to be 36.33nm.X-ray photoelectron spectroscopy confirmed the presence of the elements Ru, Sb and O in the RuSbO nanomaterial.The highresolution Ru 3d scan of RuSbO was split into two peaks at 284.5 and 280.1 eV.This indicates the presence Ru3 d5 (Ru, RuO2), as confirmed by the FTIR analysis.Asymmetric supercapacitors of RuSbO and RuSbO-G were fabricated with activated carbon in 1 M Li2SO4 electrolyte.The result showed that the ternary compound RuSbO had a capacitance of 26.09 F g -1 at 0.2 A g -1 current density, which resulted in an energy density of 11.74 W h kg -1 at a power density of 800 W kg -1 at 0.2 A g -1 current density.The device maintained 82% capacitance retention, and 100% Columbic efficiency after 4800 cycles.With the incorporation of graphene, the RuSbO-G electrode exhibited rapid electron and ion transport rates and a large electroactive surface area, due to the novel nanocomposite structures and resulting maximized synergistic effect between RuSbO and highly conductive graphene.As a result, the RuSbO-G had a higher capacitance of 129.71 F g -1 at 0.2 A g -1 current density.The resulting energy density was 58.32
Author: Ekwere, Precious Idinma
Institution: University of the Western Cape
Language: English
Field: Materials Science
Domain: Physical Sciences
Keywords: graphene composites, asymmetric supercapacitor, microwave-assisted synthesis, supercapacitor electrode materials, energy density, cycling stability, lithium sulfate electrolyte, modified Hummers method, orthorhombic structure, specific capacitance, energy storage devices, transition metal oxides
Open Access status: green
Funder: National Research Foundation
Award: G8607642743
OpenAlex ID: W7002262105
