Year: 2018
Type: dissertation
Abstract: Bu projede yeni nesil Ti-5553 havacılık alaşım malzemesinin yüksek kesme hızlarıda dahil olmak üzere geniş kesme hızı aralığında talaşlı imalat sürecinde farklı soğutucu ve yağlayıcıların iş parçasının işlenebilme performansına etkisi araştırılmıştır. \nİşlenebilme performansı çalışmaları kapsamında farklı kesme parametreleri ve kesme koşulları test edilmiştir. Özellikle kesme hızının ve kriyojenik, Minimum miktarda yağlama (MQL), yüksek basınçlı soğutma (HPC) ve kesme sıvısı gibi kesme koşullarının kesme kuvvetleri, kesme sıcaklıkları, takım aşınması ve ömrü, talaş kırılabilirliği ve morfolojisi gibi çıktılara etkileri araştırılmıştır. Özellikle bu koşulların yüksek kesme hızlarında malzemenin işlenebilme performansına etkisi araştırılmıştır. Yüksek basınçlı soğutma sisteminin yüksek kesme hızlarında dahi Ti-5553 alaşımın işlenebilme performansını diğer koşullara nazaran önemli ölçüde arttırdığı görülmüştür. Kesme parametrelerinden kesme hızı kadar kesme derinliğinin de kritik bir rolünün olduğu gözlemlenmiştir. \nABSTRACT \nIn this project, the effects of various cooling and lubrications under wide range of cutting speeds including high speed cutting on machining performance and surface integrity of Ti-5553 new generation aerospace alloys. \nMachining performance of this alloy were tested considering various cutting parameters and conditions. In this particular, the effects of cutting speed and dry, MQL,flood cooling, cryogenic and high-pressure coolant on machining performance of this Ti-5553 alloy by measuring cutting forces, cutting temperature, cutting tool wear, tool life, chip breaking etc. were investigated. The influence of these conditions on machining performance of this alloy at high speed cutting was the focus of this research. This study showed that high pressure coolant applications provides important opportunity to improve machining performance of this alloy as compared with other conditions by substantially increasing tool life. Besides, depth of cut is found as critical factor as cutting speed by affecting machining performance.
Author: Gharıbı, Armın
Language: Turkish
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Keywords: Ti-5553 alloy, titanium alloys, machining performance, high-speed machining, cutting fluids, cryogenic cooling, minimum quantity lubrication, high-pressure coolant, cutting speed, depth of cut, cutting force, cutting temperature, tool wear, tool life, chip formation, surface integrity, aerospace alloys
Open Access status: green
OpenAlex ID: W7006453437
