Work

AMIANTO NEL POLO PETROLCHIMICO DI SIRACUSA: \nCARATTERISTICHE MINERALOGICHE E FISICHE DI UN MATERIALE LARGAMENTE \nUTILIZZATO

Year: 2009
Type: dissertation
Abstract: In the second half of the last century, asbestos had been widely used in the industrial area of Priolo \nand Augusta, in Syracuse province (Sicily, Italy), before being definitively banned in 1992. \nThis research has permitted to reconstruct the use of asbestos-containing materials in the \npetrochemical industry and shipyards of this area, starting from an accurate historical census. \nOnce the asbestos sheeting had been identified as a commonly used material, then the operation \ntemperatures were reproduced under laboratory conditions in order to assess both the physical and \nmineralogical transformations in the asbestos. \nBoth tensile and pull up tests were carried out which highlighted good mechanical characteristics of \nthe samples from the asbestos sheets which had not been thermally treated. Nevertheless, these \nmechanical characteristics suddenly deteriorate with increasing temperature and, consequently, the \ntensile strength of the material is strongly reduced, so much that, at the end of this process, the pull \nup test shows a radical deterioration of the material. These data can be related to the fiber release \npotential, which linearly increases with the treatment temperature of the materials, therefore \nproportionally increasing both the fiber release hazard and the risk of pathogenicity. \nThe microscopic analysis showed that the higher the treatment temperature is, the more rearranged \nthe texture will be, according to the assessment process of the mechanical characteristics. The \nchemical-mineralogical investigation carried out by SEM and DRX methods detected some fibrous \nstructures which tend to remain in those samples which are subjected to a thermal treatment. The \ntypical elongated, sinuous and rolled morphology of the fibers, along with the objective evidences \nfrom the peaks of the DRX diffractograms, clearly highlight the presence of chrysotile. It is worth \nnoting that the chrysotile is well recognizable in the samples which are heated up to the temperature \nof 550° and not in those which are heated at 750°, when talc and forsterite generate from the \ntransformation of serpentine and the contemporaneous loss of hydroxyl groups. One of the most \ninteresting results from the SEM analysis is that the habitus of the olivine, which originates from \nchrysotile and is generally expected to be prismatic, maintains its fibrous aspect instead. In the \nnatural state, indeed, if the passage from chrysotile to olivine occurs suddenly, this transformation is \ntopotactic, i.e. it occurs by ionic diffusion of Mg and Si, leaving the oxygen lattice unchanged as \nmuch as possible. This mechanism leads to a high level of pseudomorphosis of the olivine which \ntends to maintain a microscopically fibrous structure.
Source: EprintsUnife
Language: English
Field: Medicine
Open Access status: green
OpenAlex ID: W7007660840
Cites: 13
Cited by:
Related to: 10