Work

Polydopamine coated platinum catalysts to improve fuel cells durability

Year: 2022
Type: dissertation
Abstract: Polymer electrolyte membrane fuel cells (PEMFC) are in the forefront of energy production and have drawn a great deal of attention in both fundamental and application in recent years.It is a promising energy system used in commercialized electric vehicles presenting with the following advantages: low-temperature operation, high power density (40%-60%), nearly zero pollutants compared to conventional internal combustion gasoline vehicles, simple structure, and so on.There are, however, two major obstacles which obstruct PMFCs pathway to commercialization-durability and cost.Recent advances in PEMFC systems showed the most common fuel cell catalysts to be Platinum (Pt) (or platinum alloys) supported by high surface carbon in both the cathode and anode.However, carbon is very susceptible to corrosion and results in lower durability of Pt supported catalysts.The rate of the oxygen reduction reaction (ORR) occurring in the cathode catalyst layer primarily determines the cell voltage, as the rate of the anodic reaction is considerably faster by comparison.The characteristics of the cathode catalyst layer, therefore, have a huge impact on the overall performance of PEMFC.Successful commercialization requires ORR electrocatalysts that can meet performance targets, are low in cost and are highly durable.Currently not all proposed approaches meet these demands.This study was performed to improve the durability of the Pt catalyst by means of material modification without compromising the ORR performance of the catalyst.This encompasses a mitigation strategy in which the surface of the carbon support is chemical modified to reduce the effect of carbon degradation.Recent studies of Polydopamine (PDA), the final oxidation product of dopamine or other catecholamines, attracted much attention as versatile coatings that can be used to cover the surface of almost any material with a conformal layer of adjustable thickness ranging from a few to about 100 nm.GKB40 (40% Pt supported on Graphitized Ketjen black (GKB)) was coated with a thin film of PDA at different deposition times and calcined.GKB40, PDA1/GKB40 and PDA24/GKB40 electrocatalysts were investigated and evaluated in terms of their surface morphology, mass composition and structural changes using High Resolution Transmission Electron Microscopy (HRTEM), Thermogravimetric Analysis (TGA), Fourier Transmission Infrared Spectroscopy (FTIR) analysis respectively.The electrochemical activity, kinetics, and durability towards the http://etd.uwc.ac.za/The results presented here suggest that the studied PDA coating material are suitable to prepare Pt catalysts supported on graphitized Ketjen black, increasing their activity toward the ORR and durability.PDA/GKB40 are therefore good candidates to be employed as cathodes in proton exchange membrane fuel cells.
Author: Mugeni, Ange Mireille
Language: English
Field: Energy
Open Access status: green
OpenAlex ID: W7014509920
Cites: 81
Cited by:
Related to: 10