In-situ study of biomass pyrolysis and the utilisation of its solid products in Reverse Water-Gas Shift reaction.
Year: 2023
Type: dissertation
Abstract: Renewable energy alternatives such as bioenergy from biomass are increasingly being sought out because of the rise in global temperatures. Pyrolysis is one pathway that may be employed in the conversion of biomass into useful products. The fundamentals of the reactions occurring during the pyrolysis process remain largely unknown. The process yields biochar (solid), bio-oils (liquid) and non-condensable gases. Polycyclic aromatic hydrocarbons (PAHs) form a part of bio-oil in the vapour phase during pyrolysis. A vertical fixed-bed reactor was used in pyrolysing almond shells (AS) and walnut shells (WS) and planar laser induced fluorescence used to detect 3 – 5 ring PAH ‘in-situ’. PAHs were first observed at ~ 275 °C and seen to peak at ~ 375 °C for the AS and ~ 400 °C for the WS. The intensity of the signal decreased after peak temperatures and was close to disappearance by ~ 550 °C. The detection of PAHs at the lower temperatures were as a result of condensation reactions that occurred because of the drop in temperature along and above the sample bed. The findings showed the necessity for use of online techniques as the released products quickly evolved close to the sample bed. Following the analysis of the vapour phase, the study of the evolution of a WS particle into biochar during pyrolysis is achieved using micro-computed tomography synchrotron. A fixed-bed reactor was also used for the online experiments. As the particle was irregularly shaped, there was initial asymmetric shrinkage that turned symmetric after 590 °C. Apparent shrinkage begun at 400 °C as a result of the lignin content present in the WS sample that managed to stabilise the particle. 60% of bulk shrinkage had occurred by 590 °C. The pores maintained their shape but expanded at 430 °C and 490 °C and then contracted. The pyrolysis residue, biochar, may be used for numerous applications; among them for catalysis. In this thesis it is used for reverse water gas shift (RWGS) reaction. RWGS aids in the reduction of CO2 through its conversion to CO. AS biochar was used as support for Fe impregnation. The biochar-based Fe catalysts all managed to suppress the formation of methane and achieved CO2 conversion of > 80 %v/v. XRD detected presence of Fe3C, Fe3O4 and Fe0. Fe0 was the main active phase.
Author: Mosonik, M
Institution: Queen Mary University of London
Language: English
Subfield: Fuel Technology
Field: Energy
Domain: Physical Sciences
Open Access status: green
Funder: University College London
OpenAlex ID: W7015268321
