Work

Alloy Design and Precipitation Modeling of High Fe Concentration Recycled Cast Aluminum Alloys for Structural Applications

Year: 2019
Type: article
Abstract: Cast aluminum alloys have been increasingly used in numerous automotive applications where light weight and high performance is required.Light weighting of vehicles by replacing steel components with aluminum castings can significantly increase their fuel efficiency and reduce greenhouse emissions during their life-time.The production of primary aluminum is an energy intensive process and is responsible for 1% of global greenhouse gas emissions.On the other hand, aluminum can be recycled with exceptional recovery rate while saving up ~95% of the energy used in the production of primary aluminum.Therefore, the increased use of recycled aluminum alloys in production of lightweight structural castings can reduce costs and environmental impact.However, the application of castings manufactured from recycled aluminum alloys is limited due to the accumulation of trump elements, especially iron (Fe) that cannot be refined during the recycling process and reduce mechanical properties of alloys through formation of hard and brittle intermetallics.Fe is by far the most detrimental impurity element and forms ironcontaining intermetallic β-Al5FeSi phase that degrades the mechanical properties of aluminum castings.The accepted and economical foundry practice is to add manganese (Mn) for suppressing the β-phase formation.Critical Mn concentration required to prevent the formation of detrimental β-Al5FeSi, depends on both the alloy composition (particularly A. Luo, for his patience, support and guidance throughout my studies.Without his invaluable insights and constant encouragement, I wouldn't be able to bring this work to conclusion.I also like to acknowledge my committee members Prof. Micheal Mills and Prof. Yunzhi Wang for their constructive criticism of my work and suggestions to improve it for better.Special thanks are due to all the past and current members of Light Metals and Manufacturing Research Laboratory.Specifically, members of the so called "coffee caravan", Dr. Zhi Liang, Dr. Scott Sutton, and the newest addition Janet Meier, for taking the long journey to the coffee room and all the scientific discussions that I wasn't awake for.I am grateful to Colin Ridgeway and Dr. Cheng Gu for the sincere support and their friendship.Thanks for pushing me to do better and for all the discussions we had on
Language: English
Open Access status: green
OpenAlex ID: W7017034289
FWCI: 0.278
Cites: 95
Cited by: 2
Related to: 10