Work

Biomechanical Assessment of a Hip Exoskeleton Robot with R-4bar-R Mechanism

Year: 2023
Type: dissertation
Abstract: This study evaluates the contribution of an exoskeleton robot equipped with a spherical revolute-4bar-revolute (R-4bar-R) mechanism to human walking through clinical trials and presents a path for improving exoskeleton robots using biomechanical information obtained from the trials. The exoskeleton robot employed in this study, through the application of the R-4bar-R mechanism to the hip joint, overcomes the limitations of traditional exoskeleton robots that are confined to assisting in single sagittal axis walking, by assisting in all three directions (flexion, abduction, and rotation) using a single actuator. Before the main clinical trial, simulation experiments were conducted using open-source data alongside several preliminary clinical trials. From there, it was hypothesized that inclined walking would yield better results than level walking. And a target torque in the abduction direction, corresponding to 10% of the wearer's body weight, was established. We designed the clinical trial protocol to confirm This hypothesis for the biomechanical evaluation of the exoskeleton robot. Incorporating a ground reaction force meter, the protocol required the attachment of 24 infrared reflective markers to the lower limb. Subsequently, the subjects walked on a split-belt treadmill at a consistent speed of 1.25 m s-1. The clinical trial consisted of three walking conditions (regular walking without a robot, assisted walking with a robot, and unassisted walking with a robot) performed for 5 minutes each on level ground and a 10% slope. Two healthy subjects were recruited for the trial, and data on the hip joint's angle and moment were collected and analyzed. The trial results indicated that the metabolic rate and joint moment were mainly elevated when the subjects walked with the assistance of the exoskeleton robot, whether on a level ground or an incline. The analysis of biomechanical results revealed various causes for the discrepancies between the observed results and the intended design of the mechanism. To achieve practical auxiliary effects, this study suggested first that the alignment of the R-4bar-R mechanism and the thigh (the end effector) was parallel. Secondly, we propose adjusting the target torque to match the three-directional moment required by the human body synchronously, rather than limiting the target torque to a singular abduction moment, and employ an automatic control model utilizing a Human-in-the-Loop approach. We have, lastly, suggested the need for weight reduction by changing the material and modifying the design of the flexible shaft connection part. I expect that the effectiveness and suggested improvements of the hip joint assist exoskeleton robot with the spherical R-4bar-R structure proposed in this study will make a significant contribution to overcoming the limitations of single-joint exoskeleton robot research and will help in the expansion of multi-axis joint exoskeleton robot research.
Author: 김태환
Language: English
Open Access status: green
OpenAlex ID: W7017457393
Cites: 33
Cited by:
Related to: 10