Development and Investigation of a Printed Multi-Ion-Selective Sensor System Towards Healthcare Applications
Year: 2021
Type: dissertation
Abstract: Wearable devices offer an important enrichment to the healthcare and fitness sector as they allow for continuous monitoring of body parameters. In particular, the application of wearables in the field of sweat analysis becomes of high interest due to its non-invasive character, which minimizes discomfort and is easily accessible. Within this work, the technical base for a screen-printed multi-ion-selective sensor system for healthcare and fitness applications is presented. This sensor system combines for the first time the advantages of printing technology and the simultaneous measurement of primary and interfering ions. Printing technology enables flexibility, low-cost fabrication, miniaturization, and portability. Moreover, a simultaneous measurement of primary and interfering ions facilitates the exclusion of the impact of the interfering potentials reducing an overestimation during the determination of the primary ion concentration. The electrodes are developed with focusing on an application of sweat analysis, in detail the detection of physical stress. However, due to the generic design of the sensor system, it can be adapted to a wide range of applications, where concentrations of ions in fluids are of interest, e.g. in the environmental, food, as well as industrial sector. With a focus on the detection of physical stress, sport performance tests are carried out and compared to conventional measurements and published results. The results of the performance tests reveal the importance of sweat-rate measurements and motivate the simultaneous measurement of multiple ions to correct the impact of interfering ions on the potential measurement. Correspondingly, for the determination of ammonium, sodium, potassium, and chloride ions in sweat, the respective all-solid-state ion-selective electrodes are developed in this work according to the requirements for the intended sweat analysis. Evaluating the performance of each single-ion sensor reveals response times of only a few seconds, detection limits of less than 10^(-4.5) M, and sensitivities close to the ideal Nernstian slope. Besides the four developed all-solid-state ion-selective electrodes, the multi-ion-selective sensor system consists of a single joint all-solid-state reference electrode. For a proper sensor performance, an insensitive reference electrode with a stable reference potential is crucial. Within this work, the chloride insensitivity of the reference electrode is improved successfully by reducing the membrane porosity and the leaching of sodium chloride from the membrane. This results in an excellent potential stability of the all-solid-state reference electrode with a standard deviation of about ± 10mV regardless of the measured solution and over a wide range of concentrations corresponding to the typical ion concentration ranges in sweat (10^-5 M to 10^-1 M). The improvement of the all-solid-state reference electrode and the fully functional all-solid-state ion-selective electrodes facilitate the development of the multi-ion-selective sensor system. Additionally, for the first time, a novel short-circuiting method is proposed and investigated for the developed sensor system. Only by this method, it is possible to calibrate each ion-selective electrode independently without influencing the other ion-selective electrodes. Hence, this treatment is essential to prevent any influence of the calibration sequence. Moreover, this short-circuiting method enhances the sensor-to-sensor reproducibility of the standard potential of each electrode and their mid-term repeatability. For the investigation of the short-circuiting treatment of the proposed sensor system, a theoretical model is developed describing the processes during short circuiting within the solid electrode contacts made of printed carbon. Based on the investigations and developments mentioned above, the selectivities of the sensor system are analyzed using a new data pre-processing and curve-fitting algorithm. Furthermore, a visualization model is generated to evaluate the change in the detectable concentration range due to the interdependence of the primary and interfering ions. This model facilitates the determination of the required selectivity for an application with assumed concentration ranges. Finally, the benefit of the proposed multi-ion-selective sensor system is demonstrated by experiments. This sensor system successfully simultaneously determines the concentration of all four primary ions, ammonium,sodium, potassium, and chloride. Moreover, it effectively proves the benefit of the co-determination of the concentration of the interfering ions to exclude their impact on the measurement of the primary ions, which reduces an overestimation of the primary ion concentration. This successfully validates the usefulness of the developed sensor device for the simultaneous and continuous concentration measurement of real sweat samples and other potential fluids consisting of a mixture of different ions. In conclusion, this work presents the development and investigation of a printed multi-ion-selective sensor system. It was demonstrated how the interdependency of primary and interfering ions in mixed solutions can be overcome. The developed concept was validated by experiments. Essential characteristics, such as possible ion concentrations in sweat, for the described application of a sweat-based analysis for the determination of physical stress were considered. Above all, due to the generic design of the sensor system, its benefits are available not only for healthcare and fitness applications but also for environmental and industrial applications. Therefore, this work provides an essential contribution to the current research and development field of printed sensors.
Author: Zörner, Alicia
Institution: Friedrich-Alexander-Universität Erlangen-Nürnberg
Language: English
Subfield: Analytical Chemistry
Field: Chemistry
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7018517426
