Work

An experimental study of graphitic carbon nitride-based materials and selected metal-based semiconductors in organic solar cells combined with a computational study of perovskite solar cells.

Year: 2023
Type: dissertation
Abstract: Solar energy harvesting technologies have sparked intense scientific attention because solar energy is cleaner, inexhaustible, and can be converted to electricity via the photovoltaic effect with appropriate material systems.Photovoltaic solar cells, which convert solar energy to electricity, have emerged and shown great potential in accessing cheap and clean energy supply.The development of solar cells has evolved into three generations, i.e., first-, second-, and third-generation solar cell devices.Among these solar cell types, third-generation solar cells such as; organic solar cells (OSCs) and perovskites solar cells (PSCs) are under intense scientific analysis because they can provide a cost-effective means of solar energy conversion.Nonetheless, the performance of OSC and PSC devices is limited by several factors, including poor stability, recombination of photogenerated charges, and poor solar harvesting abilities.As a result, there is a need to develop sustainable and commercially viable high-performance OSC and PSC devices.In essence, this research looked into graphitic carbon nitride (g-C3N4)based and related materials from an experimental and computational perspective, in the iii This study also performed numerical simulations of PSC devices using the onedimensional Solar Cell Capacitance Simulator (SCAPS-1D).A device with the configuration: glass/FTO/IGZO/CH3NH3PbI3/spiro-OMeTAD/Au was numerically simulated.By optimisation of various parameters, such as the thickness of the layer, density of defects and doping densities, the device achieved a modest PCE of 19.95%.In this device, the density of defects of the absorber was very impactful and was kept at 2.5 × 10 14 cm -3 .In another investigation, the best electron transport layer (ETL) and hole transport layer (HTL) materials that could be applied in PSCs were evaluated from a lead-free device with a methylammonium tin iodide (CH3NH3SnI3) absorber layer.Among the tested ETL materials, WS2 proved to be the best, probably due to its high electron mobility of about 260 cm 2 V -1 s -1 .For the HTL materials, 2,2',7,7'-tetrakis[N,N-di(4methoxyphenyl)amino]-9,9'-spirobifluorene (spiro-OMeTAD), copper(I) oxide (Cu2O), copper(I) thiocyanate (CuSCN), copper(I) iodide (CuI), and poly(2,5-bis(3tetradecylthiophen-2-yl)thieno-[3,2-b]thiophene) (D-PBTTT-14) showed relatively higher performance.Generally, the tested devices with the best ETL and HTL materials achieved a PCE of above 16% compared to the primary device with a PCE of 10.47%.Also, devices with formamidinium tin iodide (HC(NH2)2SnI3) absorber and WS2 were simulated to explore further the effects of using different HTL materials (Cu2O, CuSCN, P3HT and D-PBTTT-14) and improve thermal stability.The device demonstrated exceptional performance of more than 20% at high temperatures ranging from 380 to 420 K but decreased when this limit was exceeded.It was shown that replacing the methyl ammonium component with formamidinium resulted in a more compact material that could withstand high temperatures.The optimised devices with Cu2O, CuSCN, and D-PBTTT-14 HTL materials achieved remarkable PCEs of more than 21%.In addition, the effects of g-C3N4 dopants on ZnO on the performance of a lead-free PSC were evaluated.The study demonstrated that g-C3N4 dopants on ZnO ETL enhanced cell performance.This was attributed to better light harvesting properties brought about by g-C3N4 and reduced recombination of charges due to the passivation of defects.Nonetheless, the ultimate device with g-C3N4/ZnO composites attained a PCE of 22%.The study also showed that cheaper metal back contacts such as Ni, Pt, and Pb can be used in place of expensive Au since the tested devices with these alternative metals attained similar PCEs iv compared to that of Au.Moreover, it was elucidated in the study that the PCE of a device comparatively increases as a function of the increasing work function of the metal back contact.Accordingly, the study offers several strategies for improving the performance of OSC and PSC devices in order to achieve commercially viable and environmentally friendly high-performance solar cells.
Language: English
Open Access status: green
OpenAlex ID: W7028318211
Cites: 631
Cited by: 6
Related to: 10