Work

Mecanoquímica en flujo (semi)continuo: optimización, síntesis de nanomateriales y aplicaciones en valorización de biomasa

Year: 2025
Type: dissertation
Abstract: Mechanical grinding has been a part of human society since ancient times, but the underlying mechanism of mechanochemical processes remained unknown until the 19th century. It would take another two centuries for mechanochemistry to be recognized as a valid sustainable methodology within the Twelve Principles of Green Chemistry mainly due to its remarkable solvent-free nature of most mechanochemical protocols, which can reduce waste production. Mechanochemistry offers as well typically faster methods and more cost-effective protocols as compared to conventional methods. However, despite all the advantages mechanochemical protocols may offer, there are certain aspects that cannot be overlooked from an industrial point of view, such as productivity, scalability, and temperature control. The drive to develop modern alternatives for industrial production has resulted in innovative techniques that address the significant drawbacks of traditional batch mechanosynthesis. A promising approach involves integrating continuous flow processes with mechanosynthesis. Flow processes offer inherent safety benefits, utilizing smaller reaction volumes and fewer solvents and reagents, reducing therefore the risk of environmental exposure to reagents and enables scaling up the processes without further re-optimization. In this regard, among the wide variety of devices and technologies developed to overcome the main drawbacks of mechanochemistry and help to achieve paramount results, Deasyl S.A. and WAB (Willy A. Bachofen AG) Group have joined forces to design an innovative reactor combining mechanochemical protocols and flow premises. The created device works under I-CHEM technology, which stands for “Impact/Inductive Continuous Flow Heated Mechanochemistry”, allowing to carry out liquid-state heated processes. Among its advantages, it is noteworthy to remark on its high loading capacity, organic solvent-free treatment, and facile scalability, making it a promising method for industrial production. As the result of a bibliographic study among the different strategies carried out for the combination of flow and mechanochemistry was performed and published with the name “Prospects for the combination of mechanochemistry and flow applied to catalytic transformations” in the journal Current Opinion in Green and Sustainable Chemistry. In this Doctoral Thesis a laboratory-scale prototype of the mentioned reactor has been used to improve previously described processes, such as biomass valorization reactions, synthesis of materials such as metal-organic frameworks, and the exploration of new applications for these materials. The results of the bibliographic studies and experimental work are divided into seven chapters. Chapter I provides an introduction covering the basic aspects of the research conducted in this Doctoral Thesis and is divided into four main sections. The first section aims to provide a historical and scientific context on mechanochemical processes. The second section focuses on the industrial scaling of these processes, as well as new existing strategies, highlighting the one implemented in this Doctoral Thesis. The third section described biomass valorization processes, especially vanillin obtention, a topic widely studied in our research group. Finally, the fourth section provides detailed information about the metal-organic frameworks featured in this thesis. Chapter II describes the main objectives that have been developed during the Doctoral Thesis. The materials and methods used during the synthesis and characterization processes are detailed in Chapter III, which had a significant impact on the experimental development of this Doctoral Thesis, as well as the theoretical basis on which they rely. Experimental results and their discussion are presented in Chapter IV. The works included in this section are as follows: i. Continuous flow catalyst-free mechanochemical conversion of isoeugenol and vanillyl alcohol for vanillin production: from lab experiments to scaled-up premises In this work, the potential of combining continuous flow and mechanochemistry for biomass valorization was initially explored. The production of vanillin using isoeugenol and vanillyl alcohol as sustainable biomass-derived raw materials was chosen due to the importance of this flavoring molecule and the current need to find alternative starting materials to petroleum-derived ones used industrially. Under this premise, outstanding results were obtained in terms of vanillin yield and productivity by carrying out the reaction in the absence of catalysts, both at the laboratory scale and in scaled-up experiments with isoeugenol as starting material. The conversion of vanillyl alcohol into vanillin was successfully performed at laboratory scale with promising results. The mentioned work has been accepted and published in Industrial and Engineering Chemistry Research with the same title, and is annexed in Chapter VI, and patented under the name “Method for manufacturing synthetic vanillin” (Patent no. WO 2024/105255 A1), annexed in the same chapter. ii. Continuous flow mechanochemical green synthesis of Zr-MOF as effective catalyst for 4-nitrophenol reduction Once the effectiveness of the reactor was confirmed, a novel strategy was developed to carry out the synthesis of the versatile Zr UiO-66 metalorganic framework using I-CHEM technology and comparing with traditional methodologies such as ball milling and solvothermal synthesis. Despite not showing remarkably high specific surface areas, as compared to those reported in the literature, the prepared Zr-MOFs proved to be excellent catalysts in the reduction of the emerging pollutant 4- nitrophenol. This reaction is of notable interest in industrial applications, especially in the pharmaceutical industry, as the reaction product, 4- aminophenol, is a precursor of paracetamol. The best results were obtained for the material prepared via continuous flow mechanochemistry using a Zr-methacrylate cluster as a metal precursor (Zr-MOF/2@RL). These findings highlight the innovative advancements achieved through the I-CHEM synthetic approach, which facilitates more effective molecular collisions and expands the potential applications of MOFs. The wet-mechanochemical procedure not only exemplifies its novel nature but also demonstrates the potential for scalability under continuous flow conditions, thereby enhancing the feasibility of largescale production. This work has been accepted in Inorganic Chemistry Communications under the title “Continuous flow mechanochemical green synthesis of Zr- MOF as effective catalyst for 4-nitrophenol reduction” and is annexed in Chapter VI. iii. Continuous flow mechanical-assisted synthesis of Ag-Cu@ZIF-8 bimetallic system for enhanced antimicrobial applications This project aims to explore the antibacterial and antifungal properties of the metal-organic framework ZIF-8 and its derivatives, with particular attention to enhancing these activities through a bimetallic system incorporating Ag and Cu, both well-known antimicrobial agents. The innovation of the study lies in the synthetic methodology employed, utilizing DYNO®-MILL Research Lab reactor. The synthesis showed an outstanding performance in the incorporation of silver nanoparticles in the framework. Antimicrobial tests against established strains of Escherichia coli, Staphylococcus aureus, and Candida albicans revealed negligible effects when using ZIF-8 despite the known toxicity of zinc at high concentrations. However, the introduction of Ag and Cu stimulated activity, achieving optimal improvement in the bimetallic compound as compared to Ag@ZIF-8 and Cu@ZIF-8 materials. The objective addressed is to present a novel synthesis protocol for ZIF-8 and related systems, demonstrating evidence of their optimal antimicrobial action and fostering new explorations in this field. iv. State-of-the-art: enhanced antitumoral activity of Au@ZIF-8 composite and vinblastine delivery on cancer cell lines Motivated by the results obtained in the antimicrobial tests, it was decided to explore the drug delivery application of these materials. For that purpose, gold nanoparticles were incorporated into the structure of ZIF-8 material, known for its anticancer effect. Additionally, taking advantage of the adsorption capacity of metal-organic frameworks, adsorption studies were conducted using a molecule commonly used in anticancer treatments, vinblastine. It is an ongoing project alongside the Genetics Department at the University of Córdoba. Finally, Chapter V includes the most relevant conclusions derived from the work developed in this Doctoral Thesis, while Chapter VI complies an appendix containing all scientific papers published during this period, alongside their respective quartiles and impact factor as listed in the Journal Citation Report (JCR) database. Additionally, the various contributions to conferences and other merits obtained during the doctoral training period are listed in Chapter VII.
Language: English
Open Access status: green
OpenAlex ID: W7039344137
Cites: 377
Cited by:
Related to: 10