In situ observations and model calculations of black carbon emission by aircraft at cruise altitude
Year: 1999
Type: article
Abstract: The exhaust aerosol of two aircraft at cruise was extensively characterized in the size range from 0.003 to 2 μm for plume ages ≤2 s. The black carbon (BC) exhaust aerosol of an older technology engine (Rolls‐Royce/Snecma M45H Mk501) consisted of a primary BC mode with a modal diameter of 0.035 μm and a mode of coagulated BC particles with a peak near 0.15–0.16 μm in diameter. The total number density at the nozzle exit plane was 3×107 cm−3. In contrast, a modern technology engine (CFM International CFM56‐3B1) emitted far smaller BC particles with a primary mode at 0.025 μm and a coagulated mode at 0.15 μm, as well as fewer particles by number with a concentration of 9×106 cm−3. The single‐scattering albedo of the jet exhaust aerosol was 0.035 ± 0.02 inside the plume, indicating a dominant contribution of ultrafine (D<0.1 μm) BC particles to light extinction. Black carbon number emission indices EI(N) varied from 3.5×1014 (CFM56‐3B1) to 1.7×1015 kg−1 (M45H Mk501) with corresponding mass emission indices EI(BC) of 0.011 and 0.1 g kg−1. Previously reported corresponding values for a CF6‐80C2A2 engine were 6×1014 kg−1 and 0.023 g kg−1, respectively. A comparison between EI(BC) values calculated by a new correlation method and measured data shows an excellent agreement, with deviations <10% at cruise conditions. By extending the EI(BC) calculation method to a globally operating aircraft fleet, a fleet‐averaged emission index EI(BC) = 0.038 g kg−1 is calculated.
DOI: 10.1029/1999jd900460
Authors: A. Petzold, A. Döpelheuer, C. A. Brock, F. Schröder
Language: English
Subfield: Atmospheric Science
Field: Earth and Planetary Sciences
Domain: Physical Sciences
SDG: Climate action
Open Access status: bronze
OpenAlex ID: W2045425219
