Addressing the challenges of lignin oligomer analysis by liquid-based separation techniques : From universal quantification to multidimensional separations
Year: 2024
Type: dissertation
Abstract: Lignin is the second most abundant biopolymer on Earth after cellulose, found in virtually all plantswhere it is responsible for rigidity, hydrophobicity and mineral transport. For a long time, it has been considereda waste in the paper production process and incinerated for its energy content. However, with the depletion ofcrude oil reserves, it has been found to have a large potential to become a candidate to alleviate the transitionto a more sustainable economy by replacing oil as a raw material in many industrial processes including theproduction of fine chemicals, fuels and plastics. This discovery induced a rapidly increasing interest in ligninvalorization. At the same time, the development of existing and new procedures to exploit lignin requires reliablechemical analysis to identify and quantify phenolic compounds along the whole stream. Lignin samples haveproven to be challenging to analyze since they contain hundreds of phenolics of vast complexity regarding size,functionality and concentration. On the top of this, reference materials are commercially available only formonomers, further hindering the research of oligomers, especially in terms of quantitative analysis. To improvethe quality of the data by providing selectivity to the analysis method, separation techniques are criticalcomponents of lignin analysis prior to detection. In this thesis work, liquid-based chromatographic techniqueswere employed to address the difficulty of separating technical lignin samples. Efforts were centered aroundapplying supercritical fluid chromatography and gel permeation chromatography.Supercritical fluid chromatography was utilized to achieve a high-resolution separation of lignin compounds priorto detection. This was particularly important when a universal detector was employed, which lead to the proposalof a single-calibrant approach to quantify lignin dimers. This way, our methodology addressed the challenge ofthe lack of dimer standards to build calibration curves. Furthermore, insights into the retention of lignophenolicswere collected regarding the selectivity differences between various stationary phases and the role of analytefunctionality.Gel permeation chromatography was thoroughly investigated in terms of the trueness of the molecular weightdetermination. Combining results from diffusion-ordered NMR, mass spectrometry and partial least squaresregression it was found that although it yields in a considerable error for monomers, linear polystyrene stillprovides reliable results for a large part of the molecular weight distribution curve. Additional observationsregarding the stability of lignin solutions and repolymerization were recorded.Multidimensional chromatography, the ultimate answer to the separation challenge of complex samples, wasapplied to characterize lignin compounds in technical lignins. A combination of GPC and SFC, not reportedbefore, was explored, with specific attention to compatibility, modulation and the achievable peak capacity.Conventional hyphenation utilizing stationary-phase assisted modulation did not yield a practically usefulmethod. Hence, valve-based solutions were employed to expand the separation space and combined with ionmobility mass spectrometry, it increased the selectivity of the method, allowing for the analysis of large ligninoligomers which have been less in the focus of earlier works. Furthermore, the creative use of valves alsoaddressed a few hindrances identified in the literature regarding the expansion of orthogonality and increasingthe peak capacity.
Author: Papp, Dániel
Language: English
Topic: Lignin and Wood Chemistry
Subfield: Process Chemistry and Technology
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7054424694
