Work

Transdermal Delivery Systems Based on Natural Polymeric Biomaterials

Year: 2023
Type: dissertation
Abstract: The human skin provides a unique delivery pathway for therapeutic and other active agents. Although several approaches have been proposed and implemented, including the use of syn-thetic and natural polymers, there is a persistent pursuit of alternative biomaterials for enhanc-ing the development of transdermal delivery systems. Therefore, in this study, natural poly-mers, namely the chitin-glucan complex (CGC), FucoPol, and polyhydroxyalkanoates (PHA), have been prospected for use as biomaterials for the fabrication of hydrogels and micronee-dles (MN) arrays, two innovative approaches for efficient and controlled drug delivery through the skin. CGC was solubilized using NaOH/urea solvent systems through a freeze/thaw procedure, overcoming its previous insolubility challenge. This approach resulted in a significant solubili-zation rate of 63–68%, yielding a chitosan-glucan complex (ChGC). Based on this process, hy-drogels were fabricated using different alkali solvent systems, NaOH and KOH solutions, via a freeze-thaw procedure. The hydrogels exhibited varying microstructures, viscoelastic proper-ties, and textures depending on the type of solvent used and their ionic strength. Furthermore, the hydrogels were biocompatible. Subsequently, optimization of the process parameters al-lowed the reduction of the time needed to prepare the CGC hydrogels, and the optimized structures demonstrated a spontaneous swelling ratio and good water retention capacity. When loaded with caffeine, hydrogels' mechanical and rheological properties were significantly affected, and the caffeine release rate depended on the pH and ionic strength of the surround-ing solution. Additionally, it was shown that increasing the CGC concentration led to the for-mation of hydrogels with a denser and tighter microstructure and increased their mechanical and rheological parameters. The hydrogels were loaded with different types of active pharma-ceutical ingredients (APIs), exhibiting permeation fluxes through artificial membranes corre-lated to the APIs' physicochemical characteristics. FucoPol was used as a structuring agent to fabricate hydrogel membranes (HMs) using Fe3+ as a crosslinker. It was demonstrated that, after a threshold of 1.5 g/L, Fe3+ concentration had a limited effect on HMs strength, while varying the concentration of FucoPol significantly in-fluenced their properties. Three FucoPol concentrations (1.0, 1.75, and 2.5wt%) combined with Fe3+ (1.5 g/L) resulted in HMs with varying microstructures, swelling ratios, and hardness values. These HMs were non-cytotoxic and exhibited anti-inflammatory properties. Additionally, the FucoPol HMs were loaded with caffeine or diclofenac sodium using different methods to assess drug loading capacity. The results showed that the loading method had an impact on the me-chanical and rheological properties of the HMs and led to distinct drug release profiles. PHAs with different compositions, including homopolymer poly(3-hydroxybutyrate) (PHB), copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) with varying HV content (14, 43, and 87wt%), and terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hy-droxyhexanoate) (PHBVHx), were used to fabricate MNs through a micromolding process. While these biopolymers were successfully utilized for MN fabrication, their distinct physico-chemical properties led to MNs with differing characteristics. PHB, PHBV (43% HV), and PHBVHx produced sharp MNs with similar failure forces (~5.5 N), suggesting the ability to pierce the human skin. PHBVHx MNs displayed greater deformation resistance and insertion studies in Parafilm multilayer systems revealed their ability to penetrate up to 396 μm without breaking. Furthermore, diclofenac sodium was coated onto PHBVHx MNs and the resulting coated MNs exhibited comparable failure forces, decreased mechanical stiffness, and a rapid drug release profile. Overall, this work demonstrated that the natural polymers CGC, FucoPol, and PHAs can be used as structuring agents for the development of novel biomaterials, namely, hydrogels and MNs, with very promising properties, thus contributing to the sustainable fabrication of im-proved transdermal delivery systems.
Author: Araújo, Diana Filipa Vieira
Language: English
Open Access status: green
OpenAlex ID: W7062451949
Cites: 127
Cited by:
Related to: 10