Toward higher purities of diols and polyols by solid-liquid equilibrium modeling and cooling crystallization
Year: 2025
Type: dissertation
Abstract: Developing biorefinery processes to convert lignocellulosic biomass, such as forestry and agricultural residues, into value-added products including different diols and polyols (e.g., sugar alcohols, glycols, and by-products such as glycerol) requires the integration of efficient downstream processes. The purification of monoethylene glycol (MEG) from close-boiling and azeotrope-forming impurities and the heat sensitivity issue of both MEG and glycerol has been a challenge. In this thesis, melt crystallization, a technique offering low-temperature operation, was investigated and adapted for relatively high-viscosity mixtures of MEG + 1,2-pentanediol and glycerol + diethylene glycol. This adaptation aimed to enhance the overall efficiency of the process, including the production of high-purity MEG and glycerol at high crystallization yields and reasonable crystal growth rate. Initial studies showed conventional solvent-free layer melt crystallization had poor purification efficiency with an impurity distribution coefficient of crystal layer close to 1. Alternatively, the effect of adding assisting solvents on solid-liquid equilibrium (SLE) phase behavior, crystal growth rate, and purification yield was investigated. Acetone was used for the MEG melt, while 1-butanol and a combination of acetone and 1-butanol (binary solvent) were used for the glycerol melt, chosen for their low viscosity, high vapor pressure, and lack of azeotrope formation based on the predicted vapor-liquid equilibrium data. A comparative study on the driving force for crystallization, using thermodynamic models, crystal growth rate, and viscosity, showed that the impact of the solvents on growth rates varied among MEG and glycerol mixtures due to different rate-limiting factors. Nevertheless, under controlled operating conditions, the distribution coefficient of impurity in the MEG crystal layer decreased to 0.13-0.55 with 15-25 mol.% acetone at crystal growth rates of 1.6×10-7 to 4.7×10-7 m/s. In the binary solvent and single solvent systems of glycerol, this value decreased to 0.13-0.3 and 0.2-0.35 in the first crystallization stage with a total 25 mol.% of solvent(s) at growth rates between 2×10-7 and 6.1×10-7 m/s, and 1.8×10-7 and 5.5×10-7 m/s respectively. Higher crystal purity was achieved in the binary solvent system, especially with increasing crystal growth rates in the second crystallization stage. The positive effect of the assisting solvent was evident in both systems, via increased product purity at higher crystal growth rates in glycerol mixtures and at a controlled rate in MEG mixtures. On the other hand, employing layer melt crystallization for the purification of xylitol obtained from fermented hemicellulose hydrolysate was influenced by the impurity content. High concentrations of impurities in the feed, along with the presence of heat-sensitive and colored compounds, can limit the feasibility of this method as the final purification step following solution crystallization. In addition, the efficiency of crystallization was investigated for downstream separation and purification of D-mannitol in the presence of major impurities produced by two biosynthesis routes using lactic acid bacteria (LAB) and Yarrowia lipolytica yeast strains. The crystallization pathways and maximum theoretical yield for the selective crystallization of mannitol from solutions with different erythritol concentrations, a major by-product of mannitol biosynthesis by yeast, were evaluated based on the predicted ternary solid-liquid phase diagram using a group contribution model. Despite the effect of impurities on crystal yield, controlled cooling crystallization showed high purification efficiency in both synthetic mannitol-erythritol mixtures and LAB fermentation broth containing lactate and acetate as major impurities.
Source: Aaltodoc (Aalto University)
Author: Ila, Mitra
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7071533132
