p-/n-type conduction in activated carbon NO2 sensors with enhanced low-concentration sensitivity at room temperature
Year: 2025
Type: article
Abstract: Gas sensors play a vital role in monitoring air quality across a wide range of applications, including industry, transport and healthcare. The present study investigates the nitrogen dioxide (NO 2 ) sensing capability of four commercial activated carbons (ACs), including two coal-based (MSC 30 and CW 30) and two bio-based (A supra and PK1-3) ACs at room temperature (25 °C). The ACs exhibited distinct textural properties, with specific surface areas ranging from 916 to 2233 m 2 g -1 . Key sensing parameters including responses, R and R ci (%), response time, recovery time, sensitivity, linearity, repeatability, reversibility and stability were examined under controlled NO 2 exposures. The fabricated sensors were exposed to continuous cycles of varying NO 2 concentrations, from 1 to 10 ppm, in 1 ppm increments, and from 1 to 20 ppm in 5 ppm increments. The sensors exhibited p- or n- type conduction behavior, depending on the AC, confirmed by Mott-Schottky measurements. Reversible sensing was governed by weak physical interactions (physisorption) of NO 2 gas on the sensor surface and charge transport via charge hopping. These findings offer valuable guidance for selecting appropriate materials in the development of high-performance, room temperature AC-based NO 2 sensors, which are an essential component of effective environmental monitoring.
Source: Carbon
Authors: Proscovia Kyokunzire, Jean Zaraket, Maria Teresa Izquierdo, Vanessa Fierro, Alain Celzard
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $4,830
OpenAlex ID: W7083589388