Year: 2025
Type: article
Abstract: This project builds a simulation foundation for selective cell heating in a phase-change memory (PCM) crossbar using Ge2Sb2Te5 (GST) as the active material. Using COMSOL Multiphysics® a 3D modeling software, couples Electric Currents, Electric Circuits, Heat Transfer in Solids, and Electromagnetic Heating for the simulation. A parameterized Tungsten (W)/GST-Amorphous/GST-Crystalline(phases) /W embedded in Silica Dioxide (SiO2) and surrounded in Silica Nitride (Si3N4) is validated at the single-cell level and scaled to small GST crossbars A terminal voltage (V_active/V_inactive, or 0 V if unselected) is applied through MOSFET and diode selector elements at the ends of each word line and bit line. These selectors control current flow and confine heating to the targeted cell while minimizing impact on neighboring cells. Simulation results show that milliamp-level current and Joule heating localize to the selected junction, raising its temperature to approximately 325 K, while surrounding cells remain near ambient with minimal thermal crosstalk. These findings confirm effective electrical steering and thermal isolation, providing a validated baseline for extending the platform to include latent-heat and crystallization kinetics, time-dependent pulse trains, and larger arrays aimed at multi-bit-per-cell operation in Artificial Intelligence hardware.
Author: Wilson-Thompson, Sashah
Institution: University of Connecticut
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7084316342
FWCI:
Cites:
Cited by:
Related to: