Work

Optimising supercritical CO2 saturation and reservoir conditions for geological energy storage with transcritical carbon dioxide systems

Year: 2025

Type: article

Abstract: The CO 2 -based Electrothermal Energy and Geological Storage (CEEGS) system integrates energy storage with CO 2 sequestration by storing excess renewable energy as supercritical CO 2 , which is back-produced for power generation. This study investigates reservoir (porosity, permeability, relative permeability, heterogeneity, anisotropy) and operational (injection rates, shut-in periods) parameters to maximise CO 2 saturation near the wellbore and minimise water co-production, critical for the energy storage capacity and operation of the surface transcritical CO 2 power cycles. Using CMG-STARS and CMOST-AI, we conducted a sensitivity analysis across injection rates (5–100 kg/s), porosity (0.05–0.25), permeability (10–1000 mD), and heterogeneity (C.V. 0.1–1.5). Results show that injection rates of 30–40 kg/s, porosity of 0.05–0.15, and low heterogeneity (C.V. <0.25) achieve gas saturation up o 76 % with water production below 0.1 kg/s. Shut-in periods should not exceed 3 months to limit saturation losses. These findings provide a robust framework for optimising the CEEGS site selection and operation definition, ensuring supercritical CO 2 back production with adequate characteristics for efficient energy storage and operation. • Numerical simulations evaluate reservoir parameters impact on CO 2 saturation in CEEGS • Sensitivity analysis explores porosity, permeability, and injection rates for CEEGS • Low heterogeneity (C.V. <0.25) ensures high CO2 saturation in CEEGS reservoirs • CO2 injection rates of 30–40 kg/s optimise gas saturation in CEEGS systems • Shut-in periods over 3 months increase water production, reduce CEEGS efficiency

Source: Journal of Energy Storage

DOI: 10.1016/j.est.2025.118924