Work

Flowability, shape and structure characterization of recycled particles originating from electro discharge machining of H11 alloy

Year: 2025

Type: article

Abstract: • Recycled eroded particles are suitable for additive manufacturing and powder metallurgy. • Size, shape and morphology are similar to the reference, while flowability can be improved or worsened at certain stresses. • Surface roughness is small, and coarse recycled particles have the smoothest surface. • 3D shape and pore analyses of recycled particles show higher sphericities and smaller–sized pores in low proportion. There is a need in metal powder manufacturing to provide alternative supplies because the only production method is the energy– and cost–intensive melt atomization. The aim of this study is focused on recycling of metallic particles originating from electro discharge machining. Extracted particles from accumulating erosion sludges fulfill theoretically specifications of powders regarding particle size and shape. Two fractions were analyzed via laser diffraction, image analysis and electron microscopy and compared to the benchmark H 11–alloy. Bulk properties were measured and powders were investigated in a powder shear cell regarding flowability. These properties were combined with measurements of particle surface roughness in an atomic force microscope. Powders were examined by micro–computed tomography to obtain particle–discrete data. Recycled particles fulfill requirements regarding size, shape and defects. Their bulk properties align with the reference, showing improved or worsened flowability at certain stresses. Attached graphite in recycled fractions is acting simultaneously as nano–roughness and flow additive. H 11 shows an expected flow behavior, and the coarse fraction the smoothest surface. Results of sphericity values cannot support findings for roughness and flowability. Pores within particles are least present for H 11, hence recycled fractions have better pore performance compared to literature.

Source: Advanced Powder Technology

DOI: 10.1016/j.apt.2025.105064

Authors: Oliver Voigt, Thomas Buchwald, Lisa Ditscherlein, Ralf Ditscherlein, Urs Alexander Peuker

Institution: TU Bergakademie Freiberg

Language: English

Topic: Powder Metallurgy Techniques and Materials

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Responsible consumption and production

Open Access status: hybrid

Estimated APC paid: $3,170