Pyrolyysiöljyn laadun parantaminen katalyyttisellä pyrolyysillä
Year: 2012
Type: dissertation
Abstract: Fast pyrolysis is a thermochemical conversion process used for producing pyrolysis oil from solid biomass with yields of up to 75 wt-%. Due to its high oxygen content, pyrolysis oil has many adverse properties that severely limit its use as a liquid fuel. Catalytic pyrolysis with zeolite-type cracking catalysts can be used to remove oxygen in situ in the form of CO, CO2 and H2O through decarboxylation, decarboxylation and dehydration reactions. The intermediate oxygenate molecules formed in these reactions can then react further to form more useful products such as aromatic hydrocarbons. In this work, catalytic fast pyrolysis of spruce sawdust was carried out in a bubbling fluidized bed reactor using HZSM-5 catalysts. Two catalysts with Si/Al ratios of 40 and 140 were used. The catalyst with the Si/Al ratio of 140 was also used in experiments where the amount of the catalyst was increased to 1.5 and 2 times compared to the original amount. The use of catalysts decreased the yield of organic liquids and increased the yields of pyrolytic water and non-condensable gases (primarily CO). At most, the use of catalysts decreased the oxygen content of the organic fraction of pyrolysis oil to 30.6 wt-% (dry basis), which was a 6.0 wt-% decrease compared to the non-catalytic reference experiment. The catalysts were most effective in eliminating sugar-type compounds. Another significant change in the overall chemical composition of the liquid products was the increase in the amount of water. The overall concentration of carbonyl compounds also decreased, which should increase the stability of the liquid products.
Source: Aaltodoc (Aalto University)
Author: Paasikallio, Ville
Language: English
Subfield: Fuel Technology
Field: Energy
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7113166390
