Bipolar membrane electrodialysis of sulphate solutions for CO2 mineralization – scale-up and cost
Year: 2024
Type: other
Abstract: As the world struggles with carbon emissions, carbon capture utilization and storage are becoming more interesting topics. Conventional carbon storage is done either by geological storage, or ocean storage. Unfortunately, geological storage is not possible in large parts of the world, for example, in or near Finland. Ocean storage is not considered a relevant choice by much of the world. Therefore, other suitable methods are being researched. This thesis is related to a carbon capture utilization, and storage method by mineralization (CCSM) process under development at Åbo Akademi University. In this process, magnesium is extracted from magnesium silicate – containing rock with sulphuric acid. This results in magnesium sulphate being formed, which after removal of metallic containments, reacts with carbon dioxide and an alkaline solution to form magnesium carbonate and a corresponding sulphate to the alkaline used. In the case that this thesis covers, bipolar membrane electrodialysis (BPMED) is used to recycle substances used in the CCSM process. The BPMED process converts a salt to a base and an acid using bipolar membranes and electricity for splitting water and ion separation. This thesis has a focus on the optimization, possible scale-up for industrial purpose and costs involved. Data is gathered from a lab-scale pilot unit provided by Eurodia (France), using several pure salt sulphates as well as sulphate solutions obtained after carbonation of a magnesium sulphate solution and removal of carbonate product. A large part of the optimization consists of determining the salt that is most efficient for the process, whether it is ammonium sulphate, sodium sulphate or potassium sulphate. Some tests were performed to investigate whether a two-compartment stack or a three-compartment stack should be used. As a two-compartment stack only separates the anions, it generates an acid and a mix of the base and product solution. This means the conductivity remains relatively high, which is a problem for ammonium sulphate, or more specifically the base that ammonium sulphate generates, ammonium hydroxide. However, sodium sulphate and potassium sulphate, or their respectively generated solutions, do not have the problem of low conductivity. This indicates that a three-compartment stack could be favourable. The water balances also present a challenge in a two-compartment setup, while a three-compartment setup does not seem to have the same problem. Once setup and salt are selected, optimization can be carried out. The effects of different parameters will be tested, and ideal operating conditions hopefully found. Lastly an economic analysis, or estimation, will be made and in combination a scale -up. The effects of the scale-up on costs is of particular interest, whether it is linear or not and where major costs arise. A comparison will be made between the investment and running costs versus the cost of simply purchasing acid and base for the CCSM process, and possibly selling the produced sulphate salt.
Source: Doria (University of Helsinki)
Author: Hägglund, Boris
Institution: Åbo Akademi University
Language: English
Subfield: Filtration and Separation
Field: Chemical Engineering
Domain: Physical Sciences
Keywords: bipolar membrane electrodialysis, CO2 mineralization, carbon capture utilization and storage, magnesium sulfate, sulfate solutions, ammonium sulfate, sodium sulfate, potassium sulfate, conductivity, water balance, process optimization, scale-up, cost analysis, magnesium carbonate, sulfuric acid, carbonation
Open Access status: green
OpenAlex ID: W7115391665
