Work

Flash-Boiling Effect on Water–Methanol Blends Sprays Generated Under Low Injection Pressure

Year: 2025

Type: article

Abstract: This study presents experimental research on the injection of water–methanol mixtures under both subcooled and superheated conditions. Injecting superheated liquid results in the formation of flash-boiling sprays, generating smaller droplets compared to non-superheated conditions. This improved atomisation leads to a decrease in spray penetration and evaporation time. The mixture of water and methanol is a non-azeotropic mixture, meaning it exhibits different bubble and dew points. Non-azeotropic mixtures are the most common type of mixture. This study investigates the atomisation characteristics of water–methanol mixtures injected under low pressure (0.5 MPa) into a quiescent ambience. The experiments were conducted in an open environment at 1-atm absolute pressure and 22 °C temperature. Five different compositions were tested, including pure water, pure methanol (99.9%), and mixtures with water–methanol volume ratios of 75/25, 50/50, and 25/75. Using laser shadowgraphy with long-distance microscopy, droplet size distributions were measured at four distinct locations. Under high superheat conditions, the droplet distribution was similar for all mixtures. The Sauter mean diameter (SMD) rapidly decreased for all liquids when subjected to superheated injection. This led to the conclusion that the composition of non-azeotropic substances has little significance in terms of droplet diameter at high superheat.

Source: Applied Sciences

DOI: 10.3390/app16010106

Authors: Łukasz Boruc, Łukasz Jan Kapusta

Institution: Warsaw University of Technology

Language: English

Topic: Fluid Dynamics and Heat Transfer

Subfield: Computational Mechanics

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $2,896

Funders: Narodowe Centrum Nauki, Narodowym Centrum Nauki