Work

Research on Carbon Emission Reduction Potential in Life Cycle Stages of Civil Buildings in China

Year: 2025
Type: dissertation
Abstract: Building energy efficiency and carbon emission reduction are critical measures in addressing global climate change. However, few studies systematically assess carbon reduction potential using life cycle assessment (LCA) while integrating case studies and regional differences. This study aims to respond to the urgent demand for carbon reduction in the building sector under the global climate crisis by exploring opportunities for emission mitigation throughout the life cycle of buildings in China. The study focuses on two types of exterior wall systems: precast concrete sandwich panels (PCSB) and autoclaved aerated concrete block walls (AACB). Based on Building Information Modeling (BIM), a carbon emission calculation model is established using the emission factor method. The life cycle carbon emissions of residential buildings in cold regions and in hot summer and cold winter regions of China are assessed across different wall systems to identify their main influencing factors. The results reveal that: the operation phase accounts for the largest share of emissions (>75%), with HVAC systems contributing over 50% of operational energy consumption; the embodied phase accounts for 26.5% of emissions; the demolition and recycling phase contributes to a negative emission of about 2% due to material recovery; regional differences are significant: in cold regions, the annual per-square-meter operational carbon emissions are 1.73 kgCO₂e higher, with a 10.52% increase in the LCA share. In the comparison across life cycle phases: during the construction phase, PCSB reduces per-unit-area emissions by 16.38 kgCO₂e/m², a decrease of 54.6%; during the operation phase, the reduction is 5.35 kgCO₂e/m², or 20.3%; HVAC systems alone contribute to an emission reduction of 151.24 kgCO₂, confirming a significant energy-saving effect. However, during the demolition and recycling phase, PCSB performs less effectively: its per-unit emission reduction is 6.05 kgCO₂/m² lower than AACB, indicating the need for improved recycling efficiency of these structures. Overall, throughout the entire life cycle, PCSB demonstrates a reduction in per-unit emissions of 316.92 kgCO₂/m² (18.33% compared to AACB), with the greatest effect observed in regions with hot summers and cold winters. A distinctive feature of this study is the use of BIM technology to construct a comprehensive carbon emission assessment model covering all stages of the building life cycle—from the production of construction materials to demolition and recycling. A systematic analysis of emission characteristics at each stage is conducted, and practical carbon reduction strategies are proposed, including the use of low-carbon and recycled materials, logistics optimization, application of prefabricated structures, expansion of renewable energy sources, and improvement of recycling technologies. The results can serve as a theoretical and practical foundation for achieving energy-saving and carbon footprint reduction goals in buildings, as well as for future research on carbon footprint optimization in construction.
Language: Russian
Open Access status: green
OpenAlex ID: W7117220040
Cites: 36
Cited by:
Related to: 10