Work

Comparative Analysis of the Spatiotemporal Evolution Patterns of Acoustic Emission Source Localization Under True Triaxial Loading and Loading-Unloading Conditions in Sandstone

Year: 2025

Type: article

Abstract: Microseismic/acoustic emission (AE) monitoring enables real-time, non-destructive observation of deformation and failure processes in rock during loading and unloading. Accordingly, this study designed two experimental schemes-sandstone loading and unloading-to comparatively investigate the spatiotemporal evolution characteristics of AE during sandstone failure under these distinct stress paths. Based on AE waveform time-frequency parameters and AE source location results obtained during testing, the failure evolution patterns of rock under both loading paths were analyzed. The results demonstrate that: (1) In both loading and load-unloading experiments, rock failure exhibited a distinct four-stage characteristic. Under pure loading conditions, failure concentrated near the point of catastrophic rupture, whereas unloading triggered premature rock fracturing, with a more pronounced AE response observed during the unloading phase. (2) For both loading paths, the dominant frequencies of AE waveforms were concentrated within the 0-200 kHz range. A distinct low-frequency (0-100 kHz), high-amplitude zone emerged prominently during Stage 4 in both cases. (3) AE source locations under load-unloading conditions revealed that during Stage 3-characterized by vertical loading combined with lateral unloading in the minimum principal stress direction-tensile failure cracks nucleated within the rock. Subsequently, during Stage 4 of the loading phase, these cracks propagated and coalesced, ultimately forming a macroscopic fracture surface on the sandstone specimen. (4) The AE source location results under pure loading failure conditions indicate that under uniaxial vertical loading, compression-shear failure fractures begin to develop within the rock mass during Stage 3. With continued loading in Stage 4, these shear fractures propagate through to the specimen surface, forming a through-going shear fracture plane.

Source: Sensors

DOI: 10.3390/s26010167

Authors: Peng Chen, Shibo Yu, Hui Wang, Zhixiu Wang, Nan Li

Institutions: Beijing General Research Institute of Mining and Metallurgy, China University of Mining and Technology

Language: English

Topic: Rock Mechanics and Modeling

Subfield: Mechanics of Materials

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $3,137

Funders: National Natural Science Foundation of China, China University of Mining and Technology