Study on the Fretting Wear of Dental Fillers with Light-Cured Composite Resin and Tooth Fixation Interface
Year: 2026
Type: article
Abstract: As a commonly used dental restorative material, light-cured composite resin exhibits mechanical properties that closely match those of natural tooth structure. In the process of biting, the filling material falls off severely due to fretting between the filling material and the fixed interface of the teeth, which shortens the life of the filling material. This study aimed to investigate the mechanisms and contributing factors of this phenomenon. In particular, this study investigated the friction and wear mechanisms at the tangential fretting interface between light-cured composite resin and the tooth substrate under varying fretting amplitudes, normal loads, and lubrication conditions. In artificial saliva, the friction coefficient increased with the fretting amplitude and decreased with the increase in the normal load. The result showed that when the fretting amplitude was large or the normal load was small, the fretting was always in the complete slip regime. When the fretting amplitude was small or the normal load was large, the fretting changed from the complete slip zone to the partial slip regime. The minimum friction coefficient in milk was 0.117, and the maximum friction coefficient in artificial saliva was 0.567. Coke and milk have little effect on the fixation of filling materials. Abrasive wear was the predominant mechanism, with small amplitudes or high loads leading to adhesive wear. The composite resin exhibited the least wear in cola and milk, while soda water and artificial saliva caused significantly greater damage.
Source: Coatings
Authors: Tao Zhang, Jiamo Niu, Xinyue Zhang, Kai Chen
Language: English
Subfield: Orthodontics
Field: Dentistry
Domain: Health Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7118707293