Year: 2026
Type: article
Abstract: Poly(ethylene oxide) (PEO)-based solid polymer electrolytes typically suffer from limited ionic conductivity at near-room temperature and often require inorganic reinforcement. Halide solid-state electrolytes such as Li3InCl6 (LIC) offer fast Li+ transport but are moisture-sensitive and typically require pressure-assisted densification. Here, we fabricate a flexible LIC–PEO composite electrolyte via slurry casting in acetonitrile with a small amount of LiPF6 additive. The free-standing membrane delivers an ionic conductivity of 1.19 mS cm−1 at 35 °C and an electrochemical stability window up to 5.15 V. Compared with pristine LIC, the composite shows improved moisture tolerance, and its conductivity can be recovered by mild heating after exposure. The electrolyte enables stable Li|LIC–PEO|Li cycling for >620 h and supports Li|LIC–PEO|NCM111 cells with capacity retentions of 84.2% after 300 cycles at 0.2 C and 80.6% after 150 cycles at 1.2 C (35 °C). Structural and surface analyses (XRD, SEM/EDX, XPS) elucidate the composite microstructure and interfacial chemistry.
Source: Batteries
Authors: Han-Xin Mei, Paolo Piccardo, Roberto Spotorno
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,258
OpenAlex ID: W7118802258