An Evaluation Method to Estimate a Vehicle’s Center of Gravity During Motion Based on Acceleration Relationships
Year: 2026
Type: article
Abstract: This paper presents a practical and cost-effective method for in-motion estimation of a vehicle’s CoG position in all three directions by measuring accelerations during two types of maneuvers: braking (longitudinal and vertical CoG estimation) and cornering (lateral and vertical CoG estimation). The proposed method’s main advantage is that it does not require knowledge of vehicle characteristics, such as mass distribution, suspension geometry, or inertia parameters. It relies solely on the known distances between the sensors and their positions relative to a defined reference point on the vehicle. To validate the developed method, experimental tests were conducted on a prototype vehicle, varying the load conditions for the proposed driving scenarios. The CoG position obtained from dynamic maneuvers was compared with reference values derived from static measurements. The results showed that the proposed method could estimate the CoG position with an average error of 3% in the longitudinal direction, a maximum error of 12% in the lateral direction, and a maximum error of 14% in the vertical direction.
DOI: 10.3390/jeta4010004
Language: English
Subfield: Automotive Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,207
OpenAlex ID: W7124281511