A Multi-Constraint Point Cloud Registration Method for Machining Error Measurement of Thin-Walled Parts
Year: 2026
Type: article
Abstract: Thin-walled parts are widely used in the automotive manufacturing industry due to their lightweight characteristics and high structural efficiency. However, it is difficult to accurately measure machining errors in key regions due to the feature deformation. To improve the online measurement accuracy of complex thin-walled parts, a machining error measurement approach based on multi-constraint point cloud registration is proposed. To address the low overlap and complex geometric features among multi-segment measured point clouds, a point cloud stitching method based on hole boundary features is developed to acquire complete measured point clouds. Meanwhile, a point cloud surface extraction method based on normal neighborhood searching is developed to acquire model point clouds. Since different regions of thin-walled parts require different geometric tolerances, a registration model integrating multiple locating and assembly constraints is proposed to satisfy the requirements for optimal point cloud registration. A measurement system composed of a line-structured light sensor and a six-axis robotic arm is developed to validate the proposed method. Experimental results show that the proposed approach reduces the overall dimensional error of point cloud stitching by approximately 70–86% and decreases the point number deviation between upper and lower surfaces by more than 98%. Furthermore, the measurement accuracy in locating holes and key assembly regions is improved to 0.05 mm and 2 mm, representing improvements of approximately 96.3% and 23.9% compared with registration methods without multi-constraint conditions, and approximately 95.3% and 14.5% compared with commonly used multi-constraint registration methods.
Source: Applied Sciences
DOI: 10.3390/app16021003
Authors: Fengyun Huang, Chenxi Shen, Dehao Fang, Jun Xiao
Institution: Wuhan University of Technology
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7124827455