Work

The Influence of Machining Deformation on the Pointing Accuracy of Pod-Type Space Self-Deployable Structures

Year: 2026

Type: article

Abstract: As key driving and supporting components of spacecraft, pod-type space self-deployable structures have terminal pointing accuracy that directly affects overall spacecraft performance. To clarify the influence of the structure’s machining deformation on its pointing accuracy, this study focuses on two key processes, namely laser welding and hot forming. Based on the bionic symmetric structural characteristics of pod-type structures, a laser welding finite element model with a surface Gaussian heat source and a hot forming constitutive model coupled with creep aging were established. An orthogonal experimental design was adopted: for laser welding, three parameters, namely laser power, spot diameter, and welding speed, each with three levels, were selected, and an L9(33) orthogonal table was constructed to conduct nine groups of simulations; for hot forming, two parameters, namely processing temperature and holding time, each with three levels, were chosen, and nine groups of simulations were designed based on the first two columns of the L9(34) orthogonal table. The combined method of residual analysis and analysis of variance was used to quantitatively identify the influence of each process parameter on pointing accuracy. The results show that in laser welding, welding speed has the most significant impact on deformation, followed by laser power, and spot diameter has the least; in hot forming, processing temperature and holding time have similar effects on deformation. Physical machining verification was performed, and the actually measured deformations are 0.164 mm and 0.034 mm, which are close to the simulation results of 0.176 mm and 0.047 mm, meeting the index requirement that the terminal pointing deformation of a single pod structure is less than 0.2 mm. The results can provide a theoretical basis and engineering reference for the actual machining of such structures.

Source: Symmetry

DOI: 10.3390/sym18010196