Work

Disintegration of Liquid Jets in Grinding Cooling

Year: 2026

Type: article

Abstract: Liquid coolant jets are commonly used to remove excess heat from workpieces during grinding. There is a pressing need to reduce energy waste that contributes to environmental heat pollution and to limit the spread of oil-based coolants and mist formation. As a liquid jet issues from a nozzle and enters the surrounding air, surface instabilities develop, causing the jet to break into droplets. This breakup diminishes the jet’s ability to deliver maximum momentum to the workpiece and grinding wheel in grinding operations, thereby reducing cooling efficiency. The presence of moving ambient air near the workpiece and rotating grinding wheel further complicates cooling. First, the study investigates jet breakups in stationary air, predicting breakup lengths with reasonable agreement to experiments at varying jet velocities using the Reynolds Averaged Navier–Stokes (RANS) method equipped with Shear Stress Transport (SST) k-ω model of turbulence. The coolant jet breakup length for a jet normal to the grinding wheel is different from that for a free jet and affected by the proximity of grinding wheel to nozzle that was not evaluated in prior studies. Simulations were performed using Ansys Fluent software 2023R1, with careful tuning of numerical schemes and selection of breakup criteria. The results include analysis of jet breakup phenomena in presence of rotating grinding wheel and workpieces, determination of breakup lengths across a range of Weber numbers, and effects of nozzle design.

Source: Processes

DOI: 10.3390/pr14020389

Authors: Sheikh Ahmad Sakib, Alex Povitsky

Institution: University of Akron

Language: English

Topic: Fluid Dynamics and Heat Transfer

Subfield: Computational Mechanics

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $2,896

Funder: National Science Foundation