Work

Handling Stability Control for Multi-Axle Distributed Drive Vehicles Based on Model Predictive Control

Year: 2026

Type: article

Abstract: Multi-axle vehicles are commonly used for heavy-duty special operations, which easily leads to high driving torque demands when adopting distributed electric drive configurations. This study achieves the objective of reducing the driving torque of each in-wheel motor while controlling the stability of multi-axle vehicles. Taking a five-axle distributed drive test vehicle as the research object, a hierarchical control strategy integrating active all-wheel steering and direct yaw moment control is proposed. The upper layer is implemented based on model predictive control, with fuzzy control introduced to dynamically adjust control weights; the lower layer accomplishes the allocation of targets calculated by the upper layer through minimizing the objective function of tire load ratio. A linear parameter varying (LPV) tire model is introduced into the vehicle model to improve the calculation accuracy of tire lateral forces, and a neural network method is employed to solve the real-time performance issue of the model predictive control (MPC) controller. The proposed strategy is verified through a combination of simulation and real vehicle tests. High-speed condition simulations demonstrate that the AWS/DYC strategy significantly outperforms the ARS/DYC approach: compared to the active rear-wheel steering strategy, while the sideslip angle is reduced by 90.98%, the peak driving torque is reduced by 30.78%. Notably, tire slip angle analysis reveals that AWS/DYC maintains relatively uniform slip angle distribution across axles with a maximum of 4.7°, entirely within the linear working region, optimally balancing tire performance utilization with lateral stability while preserving safety margin, whereas ARS/DYC causes slip angles to exceed 11.9° at the rear axle, entering saturation. Low-speed real vehicle tests further confirm the engineering applicability of the strategy. The proposed method is of significant importance for the application of distributed drive configurations in the field of special vehicles.

Source: Vehicles

DOI: 10.3390/vehicles8020026