Work

Effect of minor gallium additions on liquid-phase sintering and optimization of post-sintering heat treatment of Nd2Fe14B-based magnets probed by DSC method

Year: 2026
Type: article
Abstract: The effect of minor gallium additions (0, 0.5, and 1 wt. %) on the liquid-phase sintering process, microstructure, and magnetic properties has been investigated for isotropic samples sintered in situ in a thermal analyzer and anisotropic permanent magnets based on the (Nd,Pr)–(Fe,Co,Ga,Cu,Al)–B system. Using in situ differential scanning calorimetry and thermogravimetric analysis, it is established that the introduction of gallium significantly modifies the liquid-phase sintering process: the temperature range of melting of low-melting phases narrows, and the thermal effect is reduced. A substantial influence of gallium on the optimal regimes of the subsequent two-step heat treatment has been discovered: with an increase in its content to 1 wt. %, the temperature of the high-temperature annealing T1 decreases by 90 °C (from 910 to 820 °C) and that of the low-temperature annealing T2 by 60 °C (from 540 to 480 °C). For anisotropic magnets, doping with 0.5 wt. % Ga leads to the optimization of the grain-boundary microstructure and a significant increase in the coercivity (HcJ up to 17.1 kOe) and maximum energy product [(BH)max up to 44.6 MG Oe].
Language: English
Open Access status: green
OpenAlex ID: W7128532121
FWCI:
Cites: 36
Cited by:
Related to: 10