Work

Effect of Different Austenitizing Temperatures on the Microstructure and Mechanical Properties of Austempering Gray Cast Iron

Year: 2026

Type: article

Abstract: To meet the mechanical property requirements of gray cast iron for the shells of coal mine explosion-proof equipment and investigate the effect of austenitizing temperature on the microstructure and mechanical properties of gray cast iron, isothermal quenching was conducted at four austenitizing temperatures (890 °C, 910 °C, 930 °C, and 950 °C), with cast samples as the control group. The microstructure was using a scanning electron microscope, and the mechanical properties were tested using a universal tensile testing machine, a drop-weight impact testing machine and a hardness tester. The results show that the matrix microstructure of gray cast iron transforms from ferrite + pearlite to ausferrite after isothermal quenching, and the proportion of ausferrite increases gradually with the rise of austenitizing temperature. At an austenitizing temperature of 930 °C, the hardness of the sample reaches a maximum value of 247.6 HBW, which is 31.9% higher than that of the cast sample. At 910 °C, the impact energy and tensile strength achieve the optimal values of 9.59 J and 219 MPa, respectively, with an increase of 6.43 J and 51 MPa compared with the cast sample. Comprehensive analysis indicates that the austenitizing temperature of 910 °C can improve the strength while maintaining good toughness, which makes it more suitable for application scenarios requiring both strength and toughness such as coal mine explosion-proof equipment.

Source: Applied Sciences

DOI: 10.3390/app16041828