Get started
Work

Study on the Microstructure Evolution of Mg-1Ca-(2Ag) Alloys During Hot Rolling and Its Corrosion Properties

Year: 2026
Type: article
Abstract: Magnesium alloys’ poor corrosion resistance limits their applications as biodegradable bone repair materials. Alloying tailors Mg alloys’ microstructure and properties. The present study investigates the effect of 2 wt.% Ag addition on the microstructure and initial corrosion behavior of hot-rolled Mg-1Ca alloy. Mg-1Ca and Mg-1Ca-2Ag alloys were prepared by melting using Mg-2Ca and Mg-4Ag master alloys, followed by homogenization at 400 °C for 2 h, hot rolling, and stress-relief annealing at 400 °C for 6 h. The alloys were systematically characterized using field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), electron backscatter diffraction (EBSD), and X-ray diffraction (XRD). Initial corrosion behavior was evaluated via 3 h immersion tests in simulated body fluid (SBF). Results reveal Ag’s high thermal diffusivity promotes segregation at tensile twin boundaries, forming Ag3Mg nanoparticles. These nanoparticles hinder grain boundary migration and, with increased deformation, facilitate grain rotation and high-angle grain boundary formation, weakening texture. Internal stress accumulation near twin boundaries—driven by grain orientation variation and nanoparticles—induces ~86° rotation of {10–12} tensile twins around the c-axis, forming double twins. During corrosion, nanoparticles and double twins synergistically promote dense protective film formation, significantly reducing corrosion rates.
Source: Metals
DOI: 10.3390/met16020218
Language: English
Subfield: Biomaterials
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7128808709
FWCI:
Cites:
Cited by:
Related to: