Work

Prediction of Blaine Fineness of Final Product in Cement Production Using Industrial Quality Control Data Based on Chemical and Granulometric Inputs Using Machine Learning

Year: 2026

Type: article

Abstract: The cement industry is central to sustainable manufacturing due to its high energy demand and associated CO2 emissions. In cement production, a substantial share of electrical energy is consumed in the clinker grinding circuit, where Blaine fineness (specific surface area, cm2/g), a key quality output, affects both cement performance and specific energy consumption. However, laboratory Blaine measurements are typically available with a 30–60 min delay, which limits timely process interventions and may promote conservative operating practices (e.g., precautionary over-grinding) to secure quality. This study develops machine-learning models to predict the finished-product Blaine fineness (Blaine-F) from routinely recorded industrial quality-control inputs, including XRF-based oxide composition, derived chemical moduli (lime saturation factor, LSF; silica modulus, SM; alumina modulus, AM), laser-diffraction particle-size distribution descriptors (Q10/Q50/Q90 corresponding to D10/D50/D90 percentile diameters; and R3 residual fractions at selected cut sizes), and intermediate in-process fineness (Blaine-P). The models were trained on over 200 finished-product samples obtained from the quality-control laboratory information management system (LIMS) of Seza Cement Factory (SYCS Group, Turkey). Ridge regression, Random Forest, XGBoost, LightGBM, and CatBoost were tuned using RandomizedSearchCV with five-fold cross-validation and evaluated on a held-out test set using MAE, RMSE, and R2. The results show that the linear baseline provides limited explanatory power (Ridge: R2 ≈ 0.50), consistent with the strongly non-linear behavior of the grinding–separation system, whereas tree-based ensemble methods achieve higher predictive accuracy. XGBoost yields the best overall performance (R2 = 0.754; RMSE = 76.9 cm2/g), while Random Forest attains R2 = 0.744 with the lowest MAE (61.7 cm2/g). Explainability analyses indicate that Blaine-F is primarily influenced by the fine-tail PSD descriptor Q10 (D10 particle size) and the intermediate fineness Blaine-P, whereas chemistry-related variables (e.g., LSF and SiO2, and particularly SM) provide secondary yet meaningful contributions. These findings support the use of the proposed model as a virtual sensor to reduce decision latency associated with delayed laboratory Blaine measurements and to enable tighter fineness targeting. Potential energy and CO2 implications should be quantified using site-specific, plant-calibrated relationships between kWh/t and Blaine fineness, rather than inferred as measured outcomes within the present study.

Source: Applied Sciences

DOI: 10.3390/app16042046

Authors: Mustafa Taha Topaloğlu, Cevher Kürşat Macit, Ukbe Usame Uçar, Burak Tanyeri

Institution: Fırat University

Language: English

Topic: Mineral Processing and Grinding

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Industry, innovation and infrastructure

Open Access status: gold

Estimated APC paid: $2,896